PV4F240SS
Activo16mm Anti-Vandal LED Ring Button
E-Switch 16mm vandal-resistant push button with LED ring illumination.
Aplicaciones comunes
Compact anti-vandal button for space-constrained panels — medical devices, test equipment, access control keypads, and compact kiosks. The 16mm size fits where 19mm or 22mm buttons cannot. LED ring provides clear visual feedback in both light and dark environments.
Especificaciones
|
Actuator Function
Momentary = springs back when released. Maintained/latching = stays pressed until pressed again.
|
Momentary
|
|
Cutout Diameter
The hole size you drill in your panel to mount this button. 22mm is the most common industrial standard worldwide.
|
16mm
|
|
IP Rating
IP65: Dust-tight and protected against low-pressure water jets. Suitable for indoor industrial and light washdown.
|
IP65
|
|
LED Type
The style of built-in LED illumination. Ring = glows around the edge. Dot = center point. Power symbol = illuminated power icon.
|
Ring LED
|
|
Material
The bezel/body material. Metal bezels are more durable in harsh environments. Plastic is lighter and cheaper.
|
Stainless Steel
|
|
Mechanical Life
How many press cycles before mechanical failure. Higher is better — 10M cycles at 100 presses/day = 274 years.
|
500,000 cycles
|
|
Vandal Rating (IK)
IK rating for impact resistance. IK09 = 10 joules (hammer blow). IK10 = 20 joules (serious vandalism). Higher is tougher.
|
IK08
|
Las especificaciones con este icono están vinculadas a la página fuente original del fabricante
Alternativas compatibles
Estos productos son referencias cruzadas funcionalmente equivalentes de otros fabricantes.
Referencia rápida de instalación
Panel cutout: 16mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Dimensiones
Solución de problemas
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Dónde comprar
Rango de precios
$14.35 — $32.42
en 3 distribuidores
Especificaciones rápidas
- Actuator Function
- Momentary
- Cutout Diameter
- 16mm
- IP Rating
- IP65
- LED Type
- Ring LED
- Material
- Stainless Steel
Lo que dicen los usuarios
“Solid button for panel builds. E-Switch PV4 series is well-proven in the field. Standard 22mm mounting means easy replacement if needed.”
Más información
Grados de protección IP explicados
Qué significan IP65, IP66, IP67, IP69K para su aplicación
Guía 22mm vs. 30mm
¿Qué tamaño de corte de panel necesita?
Bloques de contacto: NO vs. NC
Cómo elegir y cablear bloques de contacto
Herramienta buscador de botones
Encuentre el botón correcto por tipo, tamaño y color
Fuentes de datos
Especificaciones y datos de producto obtenidos de las siguientes referencias.
PV4F240SS Page
https://www.e-switch.com/product-catalog/anti-vandal
Consultado el April 04, 2026
