Imagen de la serie: el vendedor la utiliza para 2 otras piezas también, por lo que puede no mostrar esta versión exacta.
Switch Actuators 30mm NonIllum Flush RED Momentary
Notas de Investigación
1. What this is
AF4 is an Altech component — series not recognized.
2. Part-number decode
- Series: Altech Altech (series not recognized)
3. Compatibility & ordering
Altech 22/30mm pushbuttons are cost-effective IEC-style panel operators. Match by size (22mm), operator material (metal vs plastic), illumination (and voltage), action, and contact blocks; cross-reference to Schneider Harmony, Allen-Bradley 800F, Siemens 3SU, or Eaton M22 by the same attributes if needed.
4. Data-quality note
The exact Altech series/configuration could not be confidently decoded from this part number. Kept and documented; flagged needs-verification rather than guessed.
5. Sources
- Altech Corp datasheet / 22mm pushbutton tech specs (altechcorp.com)
- Distributor listing (Mouser / Future Electronics) — search the exact part number
Fuente
- Altech Corp — AF4 — altechcorp.com
Especificaciones
|
Enriched by
|
altech-decoder-2026-08-12
|
|
Lead time
|
12 Days
|
|
Manufacturer series
|
Altech (series not recognized)
|
|
Mouser part number
|
845-AF4
|
|
Pn status
|
needs-verification
|
|
Rohs status
|
RoHS Compliant
|
|
Series description
|
Altech Corp industrial control component — exact series/config could not be decoded from this part number; kept and flagged for verification rather than guessed
|
Referencia rápida de instalación
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Dimensiones
Solución de problemas
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Dónde comprar
Especificaciones rápidas
- Enriched by
- altech-decoder-2026-08-12
- Lead time
- 12 Days
- Manufacturer series
- Altech (series not recognized)
- Mouser part number
- 845-AF4
- Pn status
- needs-verification
Más información
Grados de protección IP explicados
Qué significan IP65, IP66, IP67, IP69K para su aplicación
Guía 22mm vs. 30mm
¿Qué tamaño de corte de panel necesita?
Bloques de contacto: NO vs. NC
Cómo elegir y cablear bloques de contacto
Herramienta buscador de botones
Encuentre el botón correcto por tipo, tamaño y color