2ALM7LB-012

Activo

Altech 2ALM7LB-012

Altech 2ALM7LB-012 — Altech 2ALM7LB-012

Imagen de la serie: el vendedor la utiliza para 5 otras piezas también, por lo que puede no mostrar esta versión exacta.

Switch Actuators Push Button Oper. 22mm, Ill

Notas de Investigación

1. What this is

2ALM7LB-012 is an Altech 2AL-series 22mm illuminated metal-operator pushbutton (integral pilot light; voltage per the trailing suffix).

2. Part-number decode

  • Series: Altech 2AL
  • Panel cutout: 22mm
  • Operator material: Metal
  • Illuminated: yes (12V)

3. Compatibility & ordering

Altech 22/30mm pushbuttons are cost-effective IEC-style panel operators. Match by size (22mm), operator material (metal vs plastic), illumination (and voltage), action, and contact blocks; cross-reference to Schneider Harmony, Allen-Bradley 800F, Siemens 3SU, or Eaton M22 by the same attributes if needed.

4. Data-quality note

The Altech series is decoded from the part number (grounded in Altech's 22mm pushbutton tech-spec sheet and distributor listings). Exact contact arrangement and cap/color depend on the full config code — confirm against the Altech datasheet for a precise order.

5. Sources

  • Altech Corp datasheet / 22mm pushbutton tech specs (altechcorp.com)
  • Distributor listing (Mouser / Future Electronics) — search the exact part number

Fuente
  1. Altech Corp — 2ALM7LB-012 — altechcorp.com

Especificaciones

Device class
pushbutton
Enriched by
altech-decoder-2026-08-12
Illuminated
true
Lead time
0 Days
Manufacturer series
2AL
Mouser part number
845-2ALM7LB012
Operator material
metal
Panel cutout
22mm
Pn status
decoded
Rohs status
Series description
Altech 2AL-series 22mm illuminated metal-operator pushbutton (integral pilot light; voltage per the trailing suffix)
Voltage
12V

Referencia rápida de instalación

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Dimensiones

Solución de problemas

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Fotos y Dibujos

Imágenes: mouser.com

Especificaciones rápidas

Device class
pushbutton
Enriched by
altech-decoder-2026-08-12
Illuminated
true
Lead time
0 Days
Manufacturer series
2AL