OMNIPOINT-2
AktivSteelSeries OmniPoint 2.0 Adjustable Switch
SteelSeries OmniPoint 2.0 — magnetic Hall effect switch with 0.1-4.0mm adjustable actuation.
Typische Anwendungen
Competing with Wooting Lekker for the Hall effect gaming switch crown. 0.1mm minimum actuation for the fastest possible response. Rapid trigger support. Dual actuation — set two actuation points on one key for different actions. Used exclusively in SteelSeries Apex Pro keyboards. Not sold separately.
Offenheit & Modifizierbarkeit
Proprietary SteelSeries hardware. Cannot be used in other keyboards. SteelSeries GG software required for configuration. No community firmware.
Spezifikationen
|
Actuation Force
The force needed to press the button. Lower = more sensitive. Sanwa ~65g (light), Seimitsu ~85g (medium), Happ ~130g (heavy).
|
45g
|
|
Mechanical Life
How many press cycles before mechanical failure. Higher is better — 10M cycles at 100 presses/day = 274 years.
|
Unlimited (no contact)
|
|
Mounting Type
How the button attaches to the panel. Panel mount is standard — installs through a cutout from the front.
|
Proprietary HE PCB
|
|
Travel Distance
How far the button moves when pressed. Shorter = faster response. Sanwa 0.85mm is extremely short for competitive gaming.
|
Adjustable 0.1-4.0mm
|
Installationskurzanleitung
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Abmessungen
Fehlerbehebung
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Bezugsquellen
Preisbereich
$43.33 — $106.35
bei 2 Händlern
Kurzspezifikationen
- Actuation Force
- 45g
- Mechanical Life
- Unlimited (no contact)
- Mounting Type
- Proprietary HE PCB
- Travel Distance
- Adjustable 0.1-4.0mm
Das sagen Anwender
“Proprietary SteelSeries hardware. Cannot be used in other keyboards. SteelSeries GG software required for configuration. No community firmware.”