3SB22020AG01

Aktiv

Siemens 3SB22020AG01

Siemens 3SB22020AG01 — Siemens 3SB22020AG01

Pushbutton Switches PUSHBUTTON,MOMENTARY,RINGS,WHT,NON IL

Forschungsnotizen

1. What this is

3SB22020AG01 is a Siemens 3SB2 16mm modular command switch (compact command/signalling device).

2. Part-number decode

  • Series: 3SB2
  • Panel cutout: 16mm
  • Construction: modular (operator + holder + contact/lamp modules are separate parts)

3. Compatibility & ordering

Siemens 16mm command switches are modular IEC-style panel devices. Match by size, function (pushbutton/selector/indicator/E-stop), color, illumination, and contact blocks; cross-reference to Schneider Harmony, Allen-Bradley 800F, IDEC HW, or Eaton M22 by the same attributes if needed.

4. Data-quality note

The Siemens series is decoded from the part number (grounded in the Siemens LV1 catalog and distributor listings). The detailed configuration (exact function, color, contact arrangement, voltage) is encoded in the full order code and is left to the Siemens datasheet rather than guessed here. Flagged decoded-partial.

5. Sources

  • Siemens LV1 catalog / SIRIUS ACT (3SU) & Class 52 selection data (siemens.com)
  • Siemens Industry Mall — search the exact part/material number
  • Distributor listing (Mouser / Newark) — search the exact part number

Quelle
  1. Siemens Industry Mall — 3SB22020AG01 — siemens.com

Spezifikationen

Device class
command-switch
Enriched by
siemens-decoder-2026-08-12
Lead time
13 Days
Manufacturer series
3SB2
Modular
true
Mouser part number
982-3SB22020AG01
Panel cutout
16mm
Pn status
decoded-partial
Rohs status
RoHS Compliant
Series description
Siemens 3SB2 16mm modular command switch (compact command/signalling device)

Installationskurzanleitung

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Abmessungen

Fehlerbehebung

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Fotos & Zeichnungen

Bilder: mouser.com

Kurzspezifikationen

Device class
command-switch
Enriched by
siemens-decoder-2026-08-12
Lead time
13 Days
Manufacturer series
3SB2
Modular
true