XACB281

Aktiv

Schneider Electric XACB281 Pendant Control Station

Artikelnummer: B
Schneider Electric XACB281 — Schneider Electric XACB281 Pendant Control Station

Schneider Electric XACB281 Pendant Control Station The Schneider Electric XACB281 is a pendant control station with a current rating of 10 Amps and a voltage rating of 600VAC. It has a screw clamp terminal connection.

Forschungsnotizen

1. What this is

XACB281 is a Schneider Electric Harmony XAC control-station enclosure / pendant component.

2. Part-number decode

  • Series: Harmony XAC
  • Type: station enclosure

3. Compatibility & ordering

Schneider's Harmony (22/16mm) and Square D Class 9001 (30mm) are the reference IEC/US command-switch ranges. Match by size (16/22/30mm), bezel material (metal XB4/ZB4 vs plastic XB5/ZB5), function (pushbutton/selector/indicator/E-stop), colour, illumination, and contact arrangement; cross-reference to Allen-Bradley 800F/800T, Siemens 3SU, IDEC HW, or Eaton M22 by the same attributes if needed.

4. Data-quality note

The Schneider series/family is identified; bezel/size are indicative and the exact colour/contact configuration is left to the Schneider datasheet rather than guessed. Flagged decoded-partial.

5. Sources

  • Schneider Electric Harmony / Square D Class 9001 catalog (se.com)
  • Distributor listing (Rexel / Mouser / Newark) — search the exact part number

Quelle
  1. Schneider Electric — XACB281 — se.com

Spezifikationen

Component type
station enclosure
Enriched by
schneider-decoder-2026-08-12
Manufacturer series
Harmony XAC
Pn status
decoded-partial
Product type
Pendant Control Station
Wireless Range
Harmony / Square D Class 9001
Series description
Schneider Harmony XAC control-station enclosure / pendant component
Shopify id
8346367852857
Vendor
Schneider Electric

Installationskurzanleitung

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Abmessungen

Fehlerbehebung

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Fotos & Zeichnungen

Bilder: cdn.shopify.com

Bezugsquellen

Preisbereich

$138.66 — $138.66

from 1 seller in US dollars

Kurzspezifikationen

Component type
station enclosure
Enriched by
schneider-decoder-2026-08-12
Manufacturer series
Harmony XAC
Pn status
decoded-partial
Product type
Pendant Control Station