1x quantity means 1 single switch! New black boba u4t v2 switches are available now! As an Official Vendor, Gazzew switches will be stocked at RingerKeys. We will continue to work closely with Gazzew to keep getting these great switches to our community. v2 "soft" pin has been made into a "hard" pin more compatible with universal sockets from Outemu/Kailh/Gateron v2 have (==) slot, rounded edges and centered Black or Pearl White Bases based on availability Available with Clear RGB (no-slot) and Pearl or Black(slotted) tops Thocky tactile switch (factory assembled) 62g, 65g, or 68g (bottom out force) light lube on the spring base and leaf Orders greater than 300 are considered bulk orders and require approval. Contact Dan!
Forschungsnotizen
1. What this is
Ringer Keys Gazzew and Boba U4T Thocky tactile switches is a mechanical keyboard switch from Ringer Keys. It is tactile.
2. Spec decode (from product name)
- Switch type: tactile
3. Compatibility & use
Standard MX-style keyboard switch. Choose by feel (linear/tactile/clicky), actuation force, and sound (silent vs standard); 5-pin PCB-mount switches also fit plate-mount boards. Hot-swap or solder depending on your board.
4. Data-quality note
The switch type is decoded from the name; the exact actuation force and mount should be confirmed against the manufacturer's spec. Flagged decoded-partial. (Note: some of these rows are catalogued under a generic push-button/arcade-button category in the source data; the correct device class is keyboard switch, recorded in the specs above.)
5. Sources
- Ringer Keys product page / keyboard-switch community databases
- Distributor / vendor listing — search the exact switch name
Quelle
- Ringer Keys Gazzew and Boba U4T Thocky tactile switches — keyboard-switch spec
Spezifikationen
|
Device class
|
mechanical keyboard switch
|
|
Enriched by
|
keyboard-decoder-2026-08-12
|
|
Pn status
|
decoded-partial
|
|
Product type
|
Parts
|
|
Series description
|
Ringer Keys mechanical keyboard switch (tactile)
|
|
Shopify id
|
4916736557138
|
|
Switch type
|
tactile
|
|
Vendor
|
Ringer Keys
|
Installationskurzanleitung
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Abmessungen
Fehlerbehebung
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Bezugsquellen
Preisbereich
$0.65 — $0.65
from 1 seller in US dollars
Kurzspezifikationen
- Device class
- mechanical keyboard switch
- Enriched by
- keyboard-decoder-2026-08-12
- Pn status
- decoded-partial
- Product type
- Parts
- Series description
- Ringer Keys mechanical keyboard switch (tactile)
