Sold in packs of 36 switches Black Lotus switches are manufactured with completely redesigned molds with an aim to reduce stem wobble and allow a full 4mm of travel despite having a long stem pole. The switches also incorporate a removable light diffuser maximizing RGB backlight effectiveness. Factory lubed Top Housing: PC & UPE blend Bottom Housing: Nylon Stem: POM blend, long pole Actuation distance: 2mm Total Travel: 4mm Actuation force: 55g Bottom out force: 63.5g 5-pin PCB mount Removable light diffuser Thick leaf pins to reduce the chance of bending in hotswap sockets.
Forschungsnotizen
1. What this is
BLACK LOTUS LINEARS ("Black Lotus Linears") is catalogued as a push-button / switch device from Prime Keyboards.
2. What we know
- Manufacturer: Prime Keyboards
- Category: push-button / switch device
- Part number / name: BLACK LOTUS LINEARS — Black Lotus Linears
- Prime Keyboards — see the manufacturer's catalog for this part.
3. How to identify / order the exact part
The full specifications for this part are not machine-decodable from the data we hold. To confirm the exact configuration (contacts, rating, colour, mounting, protocol), search the Prime Keyboards catalog for this part number on the manufacturer site or a distributor (DigiKey / Mouser / RS).
4. Data-quality note
This page is generated from the catalogued manufacturer, category, and product name. Per our keep-and-document policy we publish a page for every part we hold and state plainly what is known versus what needs verification, rather than deleting the row or inventing specs. Flagged decoded-partial.
5. Sources
- Prime Keyboards product catalog — search "BLACK LOTUS LINEARS" / "Black Lotus Linears"
Quelle
- Prime Keyboards BLACK LOTUS LINEARS — distributor/catalog
Spezifikationen
|
Device class
|
push-button
|
|
Enriched by
|
generic-fallback-2026-08-12
|
|
Pn status
|
decoded-partial
|
|
Product type
|
Parts
|
|
Shopify id
|
7982700953763
|
|
Vendor
|
Prime Keyboards
|
Installationskurzanleitung
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Abmessungen
Fehlerbehebung
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Kurzspezifikationen
- Device class
- push-button
- Enriched by
- generic-fallback-2026-08-12
- Pn status
- decoded-partial
- Product type
- Parts
- Shopify id
- 7982700953763