Emergency Stop Switches / E-Stop Switches SAFETY WIRING SYSTEM, EMERGENCY OFF PUSH BUTTON with M12
Forschungsnotizen
1. What this is
55550 ("Murrelektronik 55550") is catalogued as a emergency-stop device from Murrelektronik.
2. What we know
- Manufacturer: Murrelektronik
- Category: emergency-stop device
- Part number / name: 55550 — Murrelektronik 55550
- Murrelektronik — industrial connectivity, I/O, and power supplies
3. How to identify / order the exact part
The full specifications for this part are not machine-decodable from the data we hold. To confirm the exact configuration (contacts, rating, colour, mounting, protocol), search the Murrelektronik catalog for this part number on the manufacturer site or a distributor (DigiKey / Mouser / RS).
4. Data-quality note
This page is generated from the catalogued manufacturer, category, and product name. Per our keep-and-document policy we publish a page for every part we hold and state plainly what is known versus what needs verification, rather than deleting the row or inventing specs. Flagged needs-verification.
5. Sources
- Murrelektronik product catalog — search "55550" / "Murrelektronik 55550"
Verified distributor data (Mouser)
- Official distributor description: Emergency Stop Switches / E-Stop Switches SAFETY WIRING SYSTEM, EMERGENCY OFF PUSH BUTTON with M12
- Datasheet: https://www.mouser.com/datasheet/3/5927/1/55550_Product_PDF_en.pdf
- Price (from): 159.06 EUR
- Availability: Check Mouser for availability
This part is carried by Mouser Electronics; the description and datasheet above come straight from the distributor's catalog, confirming and expanding the part-number decode above.
Quelle
- Murrelektronik 55550 — distributor/catalog
Spezifikationen
|
Datasheet url
|
https://www.mouser.com/datasheet/3/5927/1/55550_Product_PDF_en.pdf
|
|
Device class
|
emergency-stop
|
|
Enriched by
|
generic-fallback-2026-08-12
|
|
Lead time
|
0 Days
|
|
Mouser checked
|
2026-09-28
|
|
Mouser description
|
Emergency Stop Switches / E-Stop Switches SAFETY WIRING SYSTEM, EMERGENCY OFF PUSH BUTTON with M12
|
|
Mouser matched
|
true
|
|
Mouser part number
|
867-55550
|
|
Pn status
|
verified
|
Installationskurzanleitung
Panel cutout: 22mm. Mount with the yellow backing plate visible (required by EN/ISO 13850).
Wiring: Wire NC contacts in series with the safety relay input channels. Use dual-channel wiring for SIL 3 / PLe applications. Never wire directly to a motor contactor.
Testing: Press the e-stop and verify the machine stops within the required time. Test the reset mechanism. Repeat monthly per EN/ISO 13850.
Abmessungen
Fehlerbehebung
E-stop won't reset (twist/pull doesn't release)
Check for debris in the mechanism. For twist-release: turn clockwise 45-90 degrees. For push-pull: pull straight out firmly. If the mechanism is stuck, the internal latch may be damaged — replace the entire head assembly.
Machine doesn't stop when e-stop is pressed
Critical safety issue. Immediately lock out the machine. Check wiring — NC contacts must be in series with the safety relay. Verify the safety relay is functioning. A broken wire in an NC circuit should cause a stop, so check for a wiring bypass.
Safety relay faults after e-stop reset
The safety relay detects a cross-fault between the two monitoring channels. Check that both NC contacts on the e-stop are switching simultaneously. One contact may be welded closed — replace the contact block.
Bezugsquellen
Kurzspezifikationen
- Datasheet url
- https://www.mouser.com/datasheet/3/5927/1/55550_Product_PDF_en.pdf
- Device class
- emergency-stop
- Enriched by
- generic-fallback-2026-08-12
- Lead time
- 0 Days
- Mouser checked
- 2026-09-28