V-15-1C5
AktivOmron V-15-1C5 Miniature Basic Switch SPDT 15A
One of the most manufactured switches in history.
Typische Anwendungen
Found inside vending machines, arcade cabinets, appliance door interlocks, and industrial limit switches. Billions manufactured since the 1970s.
Forschungsnotizen
1. Overview
The V-15-1C5 is a miniature snap-action basic switch originally developed under the Honeywell MICRO SWITCH brand and now sold by Omron Electronics (which acquired the MICRO SWITCH line from Honeywell's Freeport, Illinois facility). It belongs to the V15 series — Honeywell's "V-Basic Standard" family — designed to deliver outstanding value in a robust, globally certified package for "low-cost-of-failure" applications. The V15 series is one of the most widely deployed basic switch families in industrial and appliance markets, available in a wide range of actuator, terminal, and circuit configurations. The V-15-1C5 specifically decodes as: V-series miniature switch, 15A current class, pin plunger actuator (no lever), quick-connect #250 terminal, SPDT circuit configuration.
2. User Sentiment
No significant forum or community review data was found for this specific part number. However, distributor cross-reference and comparison pages (FindIC) list the V-15-1C5 (Omron/Honeywell heritage) as a direct replacement candidate for multiple Honeywell V7-series switches, reflecting its broad interoperability. The switch is classified as "discontinued" by Omron but remains available through distributors (350+ units on OnlineComponents, 46 units on DigiKey as of research date), suggesting ongoing demand for replacement/maintenance use. The V15 series overall is described by Honeywell as "ideal for low-cost-of-failure applications where the cost is minimal to replace or service any failure."
3. Real-World Applications
The V15 series is designed for presence detection (door latching, safety interlocks), float switches to prevent overflow, flow switches for water/fluid management, power switches for motors, pumps and fans, and operator-interface controls for auxiliary functions. Specific cited applications include household appliances, vending machines, small devices, door interlock systems, and limit detection in industrial equipment. The IP40 rating makes it suitable for moderately clean environments but not wash-down or outdoor use without additional enclosure.
4. Technical Specifications
- Type: Miniature snap-action basic switch (SPDT)
- Actuator: Round pin plunger (no lever)
- Terminal Style: Quick-connect 0.250" (6.3mm) / #250 blade
- Circuit: SPDT — N.O. + N.C. with common
- AC Rating: 15A @ 250VAC
- DC Rating: 600mA @ 125VDC
- Operating Force (max): 1.96N (200 gf)
- Release Force: 0.49N (50 gf)
- Pretravel: 1.2mm (0.047")
- Overtravel: 1.0mm (0.040")
- Differential Travel: 0.4mm (0.016")
- Mechanical Life: 50,000,000 operations
- Electrical Life: 100,000 operations
- Contact Material: Silver alloy
- Contact Resistance: 15mΩ max
- Ingress Protection: IP40
- Operating Temperature: -25°C to +80°C
- Mounting: Chassis mount (screw)
- Compliance: RoHS compliant; V15 series certified UL, cUL, CE, UKCA, ENEC, CQC
- Dimensions: 22.2mm x 10.3mm (diagonal mount, per V15 series)
5. Ordering & Compatibility
The V-15-1C5 is stocked by DigiKey (Z5141-ND, ~$5.31 single / $3.01 per 1000 units), OnlineComponents (~$7.06/10 units, $3.36/5000+ units), Newark (76K1170), RS Online (243-6611), CPC Farnell (SW02683), and others. The part is discontinued by Omron but available while supplies last. Related variants include V-15-1A5 (same but with solder/PCB terminal instead of quick-connect), V-152-1C5 (overtravel plunger), V-153-1C5 (short straight lever), V-155-1C25 (short hinge roller lever), and V-15G-1C5-K (with ground terminal). The V15 series part number suffix system: first digit = actuator type (1 = pin plunger), letter = terminal type (C = #250 quick-connect), last digit = circuit (5 = SPDT).
6. Known Issues
The V-15-1C5 is now discontinued by Omron with no announced drop-in replacement at the same part number. The part's 80°C maximum operating temperature is lower than some competing series (some V-series heat-resistant variants rate to 105°C), which may limit use in high-ambient environments such as appliance heating zones. No manufacturing defects or field failure patterns were identified in available sources. The IP40 rating provides no protection against water ingress, so applications in wet or wash-down environments require an appropriate enclosure.
Quelle
- V151C5 vs V3-3059 Compare - FindIC — findic.us
- V151C5 vs V7-1C13E9 Compare - FindIC — findic.us
- V151C5 vs V7-1Y19E9 Compare - FindIC — findic.us
- V151C5 vs V7-4A19E9 Compare - FindIC — findic.us
- V151C5 vs V7-6C17D8-000-2 Compare - FindIC — findic.us
- V-15-1C5 Omron Electronics Inc-EMC Div | Limit Switches | DigiKey — digikey.com
- V-15-1C5 - omron electronics - OnlineComponents.com — onlinecomponents.com
- V15 Series Standard Miniature Basic Switch - Honeywell — automation.honeywell.com
- V15 Series Basic Switches | Honeywell — sps.honeywell.com
- V-15-1C5 Datasheet(PDF) - Omron Electronics LLC — alldatasheet.com
- V-15-1C5 | Omron Plunger Micro Switch, PCB Terminal, 15A, SPDT, IP40 | RS — rs-online.com
- V-15-1C5 OMRON ELECTRONIC COMPONENTS, MICROSWITCH, PLUNGER, SPDT | Newark Electronics — newark.com
- V-15-1C5 Omron - Snap Action / Limit Switches | Octopart — octopart.com
- Omron V-15-1C5 Microswitch Pin Plunger SPDT | Amazon — amazon.com
Spezifikationen
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
UL, CSA, CE
|
|
Contact Configuration
The electrical switching arrangement.
|
SPDT
|
|
Mechanical Life
How many press cycles before mechanical failure. Higher is better — 10M cycles at 100 presses/day = 274 years.
|
10,000,000 cycles
|
|
Operating Force
Maximum force needed to press. ADA requires ≤5 lbs (22.2N) for accessibility.
|
1.47N (150gf)
|
Installationskurzanleitung
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Abmessungen
Schaltplan
Fehlerbehebung
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Bezugsquellen
Preisbereich
$4.39 — $14.91
across 2 sellers in US dollars
Kurzspezifikationen
- Certifications
- UL, CSA, CE
- Contact Configuration
- SPDT
- Mechanical Life
- 10,000,000 cycles
- Operating Force
- 1.47N (150gf)
Das sagen Anwender
“Honeywell V-15-1C5 — Found inside vending machines, arcade cabinets, appliance door interlocks, and industrial limit switches. Billions manufactured since the 1970s.”