3PDT-STOMP
Aktiv3PDT Stomp Switch (Guitar Pedal Bypass)
3PDT (Triple Pole Double Throw) stomp switch for true bypass guitar effects.
Typische Anwendungen
The button every guitarist presses with their foot to activate effects pedals. 3PDT (nine pins) enables true bypass wiring — when the effect is off, the guitar signal passes straight through without any coloring. Found in thousands of boutique and DIY guitar pedals. Press click on, press click off. The stomp mechanism must survive years of being kicked by boots. True bypass is why guitarists obsess over this specific switch type.
Reparatur & Wartung
The most commonly failing part in guitar pedals. When the pedal stops switching or switches intermittently, replace this switch first. Easy to desolder and replace. Upgrade to soft-touch relay bypass to eliminate the mechanical switch entirely.
Spezifikationen
|
Actuator Function
Momentary = springs back when released. Maintained/latching = stays pressed until pressed again.
|
Latching (on/off toggle)
|
|
Contact Configuration
The electrical switching arrangement.
|
3PDT (9 pins)
|
|
Mechanical Life
How many press cycles before mechanical failure. Higher is better — 10M cycles at 100 presses/day = 274 years.
|
30,000 cycles
|
|
Mounting Type
How the button attaches to the panel. Panel mount is standard — installs through a cutout from the front.
|
Panel mount (12mm hole)
|
Installationskurzanleitung
Panel cutout: 22mm. Standard panel mounting — insert from front, secure from behind.
Abmessungen
Schaltplan
Fehlerbehebung
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
Bezugsquellen
Preisbereich
$121.39 — $144.73
bei 2 Händlern
Kurzspezifikationen
- Actuator Function
- Latching (on/off toggle)
- Contact Configuration
- 3PDT (9 pins)
- Mechanical Life
- 30,000 cycles
- Mounting Type
- Panel mount (12mm hole)
Das sagen Anwender
“The button every guitarist presses with their foot to activate effects pedals. 3PDT (nine pins) enables true bypass wiring — when the effect is off, the guitar signal passes straight through without a”