M22-WS
AktivM22 2-Position Key Switch
Eaton M22 2-position key-operated selector switch.
Typische Anwendungen
Key switch for Eaton panels. Same M22 mounting as all other M22 operators. Used for lockout prevention on motor starters and VFD control panels.
Spezifikationen
|
Actuator Function
Momentary = springs back when released. Maintained/latching = stays pressed until pressed again.
|
Maintained, key removable in OFF position
|
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
UL, CSA, CE
|
|
Cutout Diameter
The hole size you drill in your panel to mount this button. 22mm is the most common industrial standard worldwide.
|
22.5mm
|
|
IP Rating
IP67: Dust-tight and survives temporary water submersion (1m for 30 min). Handles oil splashes, steam cleaning, and rain.
|
IP67 (front)
|
|
Series
The manufacturer's product family. Products in the same series share mounting systems and accessories.
|
M22
|
Installationskurzanleitung
Panel cutout: 22.5mm. Align the selector positions with the desired panel markings before tightening.
Contact blocks: Attach one contact block per position. Wire each to a separate PLC input for position feedback. A 2-position switch needs 1-2 blocks; 3-position needs 2-3.
Abmessungen
Fehlerbehebung
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
Bezugsquellen
Preisbereich
$47.45 — $78.91
bei 3 Händlern
Kurzspezifikationen
- Actuator Function
- Maintained, key removable in OFF position
- Certifications
- UL, CSA, CE
- Cutout Diameter
- 22.5mm
- IP Rating
- IP67 (front)
- Series
- M22
Das sagen Anwender
“Key switch for Eaton panels. Same M22 mounting as all other M22 operators. Used for lockout prevention on motor starters and VFD control panels.”
