M22-WRK
AktivM22 2-Position Selector Switch
2-position maintained selector switch for Eaton M22 series. 22.5mm cutout, IP67 front, with 1NO contact.
Typische Anwendungen
Three-position selector switch (left-center-right) with maintained action in all positions. Used for hand/off/auto control on pump stations, HVAC fan speed selection (low/medium/high), and conveyor direction control (reverse/stop/forward). The black knob with white position indicator is easy to read at a glance. Each position actuates different contact blocks mounted on the rear — typically wired to PLC discrete inputs for mode selection logic.
Häufig eingesetzt bei
Spezifikationen
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
UL, CSA, CE
|
|
Contact Configuration
Normally Open — circuit is off until you press. Standard for start/go/enable functions.
|
1NO
|
|
Cutout Diameter
The hole size you drill in your panel to mount this button. 22mm is the most common industrial standard worldwide.
|
22.5mm
|
|
IP Rating
IP67: Dust-tight and survives temporary water submersion (1m for 30 min). Handles oil splashes, steam cleaning, and rain.
|
IP67 (front)
|
|
Material
The bezel/body material. Metal bezels are more durable in harsh environments. Plastic is lighter and cheaper.
|
Plastic/Metal bezel
|
|
Mounting Type
How the button attaches to the panel. Panel mount is standard — installs through a cutout from the front.
|
Panel
|
|
Positions
|
2
|
|
Return type
|
Maintained
|
Spezifikationen mit diesem Symbol sind mit der Original-Herstellerseite verlinkt
Zusätzlich benötigt
Dies ist eine modulare Komponente. Für eine vollständige Montage benötigen Sie möglicherweise zusätzlich:
Kompatible Alternativen
Diese Produkte sind funktional gleichwertige Querverweise anderer Hersteller.
Installationskurzanleitung
Panel cutout: 22.5mm. Align the selector positions with the desired panel markings before tightening.
Contact blocks: Attach one contact block per position. Wire each to a separate PLC input for position feedback. A 2-position switch needs 1-2 blocks; 3-position needs 2-3.
Abmessungen
Schaltplan
Fehlerbehebung
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
Bezugsquellen
Preisbereich
$3.66 — $17.04
bei 4 Händlern
Kurzspezifikationen
- Certifications
- UL, CSA, CE
- Contact Configuration
- 1NO
- Cutout Diameter
- 22.5mm
- IP Rating
- IP67 (front)
- Material
- Plastic/Metal bezel
Das sagen Anwender
“Good selector for mode control applications. Make sure you get the right number of positions and maintained vs spring-return for your application.”
Mehr erfahren
Datenquellen
Spezifikationen und Produktdaten stammen aus folgenden Quellen.
Eaton M22-WRK Product Page
https://www.eaton.com/us/en-us/skuPage.M22-WRK.html
Abgerufen am March 29, 2026
