10250T501

Aktiv

Eaton 10250T501 Push Button Operator

Eaton 10250T501 Push Button Operator The Eaton 10250T501 is a push button operator features with a momentary action. It has a half shrouded actuator type. The 10250T501 has a vertical mounting type.

Forschungsnotizen

1. What this is

10250T501 is an Eaton Cutler-Hammer 10250T 30.5mm HEAVY-DUTY pushbutton / indicating light (classic US heavy-duty control-station device; NEMA 3/3R/4/4X/12/13).

2. Part-number decode

  • Series: 10250T (Cutler-Hammer)
  • Panel cutout: 30.5mm

3. Compatibility & ordering

Eaton's M22 (RMQ-Titan, 22mm) and E30 / 10250T (30.5mm heavy-duty) are its principal command-switch ranges. This is a complete/integrated device. Match by size (22 / 30.5mm), function (pushbutton/selector/indicator/E-stop), color, illumination, and contact arrangement; cross-reference to Schneider Harmony, Allen-Bradley 800F/800T, Siemens 3SU, or IDEC HW by the same attributes if needed.

4. Data-quality note

The Eaton series, size, and component type are decoded from the part number (grounded in Eaton's Vol.7 catalog and distributor listings). The exact color and contact arrangement depend on the remaining digits and the sub-family — confirm against the Eaton datasheet for a precise order (not guessed here).

5. Sources

  • Eaton control-components catalog (Vol.7) / RMQ-Titan M22 & 10250T (eaton.com)
  • Distributor listing (Newark / Mouser) — search the exact part number

Quelle
  1. Eaton — 10250T501 — eaton.com

Spezifikationen

Enriched by
eaton-decoder-2026-08-12
Manufacturer series
10250T (Cutler-Hammer)
Panel cutout
30.5mm
Pn status
decoded
Product type
Push Button Operator
Series description
Eaton Cutler-Hammer 10250T 30.5mm HEAVY-DUTY pushbutton / indicating light (classic US heavy-duty control-station device; NEMA 3/3R/4/4X/12/13)
Shopify id
8346572783929
Vendor
Eaton

Installationskurzanleitung

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Abmessungen

Fehlerbehebung

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Bezugsquellen

Preisbereich

$45.69 — $45.69

from 1 seller in US dollars

Kurzspezifikationen

Enriched by
eaton-decoder-2026-08-12
Manufacturer series
10250T (Cutler-Hammer)
Panel cutout
30.5mm
Pn status
decoded
Product type
Push Button Operator