ALF5LB-024

Aktiv

Altech ALF5LB-024

Altech ALF5LB-024 — Altech ALF5LB-024

Serienbild: Der Verkäufer verwendet es auch für 2 andere Teile, daher zeigt es möglicherweise nicht diese exakte Version.

Switch Actuators 30mm Illum Flush AMB 24VAC/DC Momentary

Forschungsnotizen

1. What this is

ALF5LB-024 is an Altech component — series not recognized.

2. Part-number decode

  • Series: Altech Altech (series not recognized)

3. Compatibility & ordering

Altech 22/30mm pushbuttons are cost-effective IEC-style panel operators. Match by size (22mm), operator material (metal vs plastic), illumination (and voltage), action, and contact blocks; cross-reference to Schneider Harmony, Allen-Bradley 800F, Siemens 3SU, or Eaton M22 by the same attributes if needed.

4. Data-quality note

The exact Altech series/configuration could not be confidently decoded from this part number. Kept and documented; flagged needs-verification rather than guessed.

5. Sources

  • Altech Corp datasheet / 22mm pushbutton tech specs (altechcorp.com)
  • Distributor listing (Mouser / Future Electronics) — search the exact part number

Quelle
  1. Altech Corp — ALF5LB-024 — altechcorp.com

Spezifikationen

Enriched by
altech-decoder-2026-08-12
Lead time
0 Days
Manufacturer series
Altech (series not recognized)
Mouser part number
845-ALF5LB-024
Pn status
needs-verification
Rohs status
RoHS Compliant
Series description
Altech Corp industrial control component — exact series/config could not be decoded from this part number; kept and flagged for verification rather than guessed

Installationskurzanleitung

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Abmessungen

Fehlerbehebung

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Fotos & Zeichnungen

Bilder: mouser.com

Kurzspezifikationen

Enriched by
altech-decoder-2026-08-12
Lead time
0 Days
Manufacturer series
Altech (series not recognized)
Mouser part number
845-ALF5LB-024
Pn status
needs-verification