One order = 10x switches. All Zealio V2 have reduced wobble that's less than Holy Pandas, while managing to be even more tactile with a bigger, smoother bump as well. Bump starts at the very top of the keypress, no pre-travel. "I can assure you that Zealios are the way to your feelios." - ChucklingKumquat Voted Best modern keyboard or company - Deskthority Awards 2016 Zealio V2 switches come in 4 variants. They are rated at "bottom out" force, not actuation! Version 2 of our switches feature a bigger tactile bump when compared to our previous Zealios. 62g - Transparent, PCB Mount [Tactile, non-clicky] 65g - Transparent, PCB Mount [Tactile, non-clicky] 67g - Transparent, PCB Mount [Tactile, non-clicky] 78g - Transparent, PCB Mount [Tactile, non-clicky] Tactile feeling for the different switch weights: 62g Zealio - Smooth, crisp and light, a bit heavier than MX Browns in weight, but offer a much smoother experience with a crisper and large tactile bump feedback when compared to Holy Pandas. Lightest variant Zealio. 65g Zealio - Smooth, long, drawn out tactile bump from the top. Nice cushion during bottom out. 67g Zealio - "Crisp & responsive" tactile bump feeling at the very top with more cushion during bottom out than 65g Zealio V2. 78g Zealio - For those that prefer a slightly lighter MX Clear, but want a bigger and smoother bump than MX Clears / Holy Pandas. Tactile bump is round and snappy at the very top. From beginning to end, the spring is heavier than all other Zealio variants. Please note that PCB mounted switches can still be used in many plate mounted keyboards. As long as your PCB underneath has 2 extra holes next to the center post, it will support PCB Mounted switches and add extra rigidity to your build. If your PCB does not have the extra holes, then you can simply cut the small plastic legs off to make them Plate-Mount! ------------ Volume orders over 20,000 switches can be submitted through the "contact us" form on ZealPC.net. When submitting your bulk order, please include desired volume of said product. Thank you.
Výzkumné poznámky
1. What this is
Zealio® V2 Switches (Tactile) is a mechanical keyboard switch from Zeal. It is tactile.
2. Spec decode (from product name)
- Switch type: tactile
3. Compatibility & use
Standard MX-style keyboard switch. Choose by feel (linear/tactile/clicky), actuation force, and sound (silent vs standard); 5-pin PCB-mount switches also fit plate-mount boards. Hot-swap or solder depending on your board.
4. Data-quality note
The switch type is decoded from the name; the exact actuation force and mount should be confirmed against the manufacturer's spec. Flagged decoded-partial. (Note: some of these rows are catalogued under a generic push-button/arcade-button category in the source data; the correct device class is keyboard switch, recorded in the specs above.)
5. Sources
- Zeal product page / keyboard-switch community databases
- Distributor / vendor listing — search the exact switch name
Zdroj
- Zeal Zealio® V2 Switches (Tactile) — keyboard-switch spec
Specifikace
|
Device class
|
mechanical keyboard switch
|
|
Enriched by
|
keyboard-decoder-2026-08-12
|
|
Pn status
|
decoded-partial
|
|
Product type
|
|
|
Series description
|
Zeal mechanical keyboard switch (tactile)
|
|
Shopify id
|
1816736643
|
|
Switch type
|
tactile
|
|
Vendor
|
Zeal Generation Inc.
|
Stručný průvodce instalací
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Rozměry
Řešení problémů
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Stručné specifikace
- Device class
- mechanical keyboard switch
- Enriched by
- keyboard-decoder-2026-08-12
- Pn status
- decoded-partial
- Product type
- Series description
- Zeal mechanical keyboard switch (tactile)
