Wingtree BM-11 Switches are tactile switches with as sharp tactile bump at the start of the keypress. The introduction of a PC fiberglass bottom housing makes the switch a little less deep and more loud compared to its BM-10 counterpart. Sound Profile: Deep, Neutral, Sharp Wingtree BM-11 Switches Feature: Tactile Top Housing: PC Bottom Housing: PC + FIberglass Stem: Modified UPE Spring: 20mm, KOS Stainless Steel Pre-travel: 2.2±0.2mm Total Travel: 2.9±0.1mm Actuation: 50±3g Bottom-out: 56±3g 5-Pin, PCB Mount MX Structure Lubed Price: $0.32 per switch Includes: 18 Wingtree BM-11 Switches
Výzkumné poznámky
1. What this is
BM-11 TACTILE ("Wingtree BM-11 Tactile Switches") is catalogued as a push-button / switch device from WingTree.
2. What we know
- Manufacturer: WingTree
- Category: push-button / switch device
- Part number / name: BM-11 TACTILE — Wingtree BM-11 Tactile Switches
- WingTree — see the manufacturer's catalog for this part.
3. How to identify / order the exact part
The full specifications for this part are not machine-decodable from the data we hold. To confirm the exact configuration (contacts, rating, colour, mounting, protocol), search the WingTree catalog for this part number on the manufacturer site or a distributor (DigiKey / Mouser / RS).
4. Data-quality note
This page is generated from the catalogued manufacturer, category, and product name. Per our keep-and-document policy we publish a page for every part we hold and state plainly what is known versus what needs verification, rather than deleting the row or inventing specs. Flagged decoded-partial.
5. Sources
- WingTree product catalog — search "BM-11 TACTILE" / "Wingtree BM-11 Tactile Switches"
Zdroj
- WingTree BM-11 TACTILE — distributor/catalog
Specifikace
|
Device class
|
push-button
|
|
Enriched by
|
generic-fallback-2026-08-12
|
|
Pn status
|
decoded-partial
|
|
Product type
|
Switches
|
|
Shopify id
|
7798869557313
|
|
Vendor
|
Wingtree
|
Stručný průvodce instalací
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Rozměry
Řešení problémů
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Stručné specifikace
- Device class
- push-button
- Enriched by
- generic-fallback-2026-08-12
- Pn status
- decoded-partial
- Product type
- Switches
- Shopify id
- 7798869557313