KS-3 MILKY YELLOW PRO 50G LINEAR PCB MOUNT

Name: Gateron KS-3 MILKY YELLOW PRO 50G LINEAR PCB MOUNT
Brand: Gateron
SKU: KS-3 MILKY YELLOW PRO 50G LINEAR PCB MOUNT
Price: 0.2 USD
Availability: InStock

Aktivní

Gateron KS-3 Milky Yellow Pro 50g Linear PCB Mount Switch

50g actuation force 62g bottom-out force 2.00mm pretravel 4.00mm total travel Nylon PA66 milky top and bottom housing POM stem Gold alloy contact point Stainless steel spring Factory lubed

Výzkumné poznámky

1. What this is

Gateron KS-3 Milky Yellow Pro 50g Linear PCB Mount Switch is a mechanical keyboard switch from Gateron. It is linear, 50g, 5-pin (PCB mount).

2. Spec decode (from product name)

Switch type: linear
Actuation force: 50g
Mount: 5-pin (PCB mount)

3. Compatibility & use

Standard MX-style keyboard switch. Choose by feel (linear/tactile/clicky), actuation force, and sound (silent vs standard); 5-pin PCB-mount switches also fit plate-mount boards. Hot-swap or solder depending on your board.

4. Data-quality note

The switch type, force, and/or mount are decoded from the product name (the standard way keyboard switches are specified). Confirm exact spring curve, travel, and housing/stem material against the manufacturer's spec if precision matters. (Note: some of these rows are catalogued under a generic push-button/arcade-button category in the source data; the correct device class is keyboard switch, recorded in the specs above.)

5. Sources

Gateron product page / keyboard-switch community databases
Distributor / vendor listing — search the exact switch name

Zdroj

Gateron Gateron KS-3 Milky Yellow Pro 50g Linear PCB Mount Switch — keyboard-switch spec

Specifikace

Actuation Force The force needed to press the button. Lower = more sensitive. Sanwa ~65g (light), Seimitsu ~85g (medium), Happ ~130g (heavy).	50g
Device class	mechanical keyboard switch
Enriched by	keyboard-decoder-2026-08-12
Mount	5-pin (PCB mount)
Pn status	decoded
Product type	Keyboard Switches
Series description	Gateron mechanical keyboard switch (linear)
Shopify id	9040971923756
Switch type	linear
Vendor	Gateron

Stručný průvodce instalací

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Rozměry

Řešení problémů

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.