BABY KANGAROO 59G TACTILE PCB MOUNT

Name: Gateron BABY KANGAROO 59G TACTILE PCB MOUNT
Brand: Gateron
SKU: BABY KANGAROO 59G TACTILE PCB MOUNT
Price: 0.7 USD
Availability: InStock

Aktivní

Gateron Baby Kangaroo 59g Tactile PCB Mount Switch

59g actuation force 2.00mm pre-travel 3.40mm total travel Polycarbonate top housing PA66 Nylon bottom housing POM stem 22mm double-stage gold-plated spring Factory lubed Find new version at Baby Kangaroo 2.0

Výzkumné poznámky

1. What this is

Gateron Baby Kangaroo 59g Tactile PCB Mount Switch is a mechanical keyboard switch from Gateron. It is tactile, 59g, 5-pin (PCB mount).

2. Spec decode (from product name)

Switch type: tactile
Actuation force: 59g
Mount: 5-pin (PCB mount)

3. Compatibility & use

Standard MX-style keyboard switch. Choose by feel (linear/tactile/clicky), actuation force, and sound (silent vs standard); 5-pin PCB-mount switches also fit plate-mount boards. Hot-swap or solder depending on your board.

4. Data-quality note

The switch type, force, and/or mount are decoded from the product name (the standard way keyboard switches are specified). Confirm exact spring curve, travel, and housing/stem material against the manufacturer's spec if precision matters. (Note: some of these rows are catalogued under a generic push-button/arcade-button category in the source data; the correct device class is keyboard switch, recorded in the specs above.)

5. Sources

Gateron product page / keyboard-switch community databases
Distributor / vendor listing — search the exact switch name

Zdroj

Gateron Gateron Baby Kangaroo 59g Tactile PCB Mount Switch — keyboard-switch spec

Specifikace

Actuation Force The force needed to press the button. Lower = more sensitive. Sanwa ~65g (light), Seimitsu ~85g (medium), Happ ~130g (heavy).	59g
Device class	mechanical keyboard switch
Enriched by	keyboard-decoder-2026-08-12
Mount	5-pin (PCB mount)
Pn status	decoded
Product type	Keyboard Switches
Series description	Gateron mechanical keyboard switch (tactile)
Shopify id	8874637754668
Switch type	tactile
Vendor	Gateron

Stručný průvodce instalací

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Rozměry

Řešení problémů

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.