M22-DL-W
Aktivní22mm White Illuminated Flush Pushbutton Actuator (M22)
Eaton M22 illuminated white flush button.
Běžné aplikace
White illuminated for neutral status indication. Completes the Eaton illuminated range: green, red, yellow, blue, white.
Specifikace
|
Actuator Type
The button head style. Flush sits level with the bezel (prevents accidental presses). Extended protrudes for easy access.
|
Flush
|
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
UL, CSA, CE
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
White
|
|
Component type
|
Actuator / front element only
|
|
Contact Configuration
1NO + 1NC: One circuit closes and one opens when pressed. Common for start buttons that also signal 'running' state.
|
None — contact block ordered separately (M22-K10 1NO, M22-K01 1NC, M22-K11 1NO+1NC, M22-K20 2NO)
|
|
Cutout Diameter
The hole size you drill in your panel to mount this button. 22mm is the most common industrial standard worldwide.
|
22.5mm
|
|
Illumination
Whether the button has a built-in light. Illuminated buttons show status (lit = active).
|
Illuminated (LED element ordered separately)
|
|
IP Rating
IP69K: Dust-tight and withstands high-pressure, high-temperature steam jets. Built for food processing washdown environments.
|
IP67/IP69K (front); IP66/IP67/IP69K overall
|
|
Led element
|
M22-LED-W (12-30V AC/DC) or M22-LED230-W (230V AC), ordered separately
|
|
Series
The manufacturer's product family. Products in the same series share mounting systems and accessories.
|
M22
|
Stručný průvodce instalací
Panel cutout: 22.5mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Rozměry
Schéma zapojení
Řešení problémů
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Kde koupit
Cenové rozpětí
$10.6 — $118.12
u 3 distributorů
Stručné specifikace
- Actuator Type
- Flush
- Certifications
- UL, CSA, CE
- Color
- White
- Component type
- Actuator / front element only
- Contact Configuration
- None — contact block ordered separately (M22-K10 1NO, M22-K01 1NC, M22-K11 1NO+1NC, M22-K20 2NO)
Co říkají uživatelé
“White illuminated for neutral status indication. Completes the Eaton illuminated range: green, red, yellow, blue, white.”