MX-LP-BLUE
AktivníCherry MX Low Profile (FABRICATED Blue Clicky — line is linear Red/Speed only)
Cherry MX Low Profile Blue — clicky low-profile switch.
Běžné aplikace
Clicky version of Cherrys low-profile switch. Audible click in a slim package. Same Cherry LP proprietary mount (not Choc or MX compatible).
Výzkumné poznámky
1. Overview
Cherry MX Low Profile is Cherry's ~11.9 mm reduced-height mechanical switch line (launched 2018), used in slim mechanical keyboards. Crucially, the MX Low Profile line is linear-only: the real variants are MX Low Profile RGB Red (linear, ~45 cN) and MX Low Profile RGB Speed (linear "silver", shorter/faster). It uses short travel (~1.0–1.2 mm actuation, ~3.2 mm total) and Cherry's low-profile keycap mount (not standard MX keycaps). (Data-quality note: the stored product "Cherry MX Low Profile Blue Clicky" does not exist — Cherry's MX Low Profile range has no clicky and no "Blue" variant (it's linear Red/Speed). The color and switch type here are fabricated. For an ultra-flat Cherry switch, see the separate MX ULP line (#427).)
2. User Sentiment
The real MX Low Profile (Red/Speed) is liked for bringing a genuine Cherry MX feel to thin keyboards, with a shorter throw for faster actuation (gaming). Trade-offs: short travel takes adjustment, and it uses a low-profile keycap mount (limited aftermarket keycaps, not MX-compatible). It's largely an OEM/soldered switch rather than an enthusiast hot-swap part.
3. Real-World Applications
Slim mechanical gaming/productivity keyboards (e.g. Corsair K70 Pro Mini... low-profile boards) using Cherry's low-profile Red/Speed linears.
4. Technical Specifications (real MX Low Profile line)
- Type: Low-profile mechanical, linear only — RGB Red (~45 cN) and RGB Speed (silver)
- Height: ~11.9 mm (vs ~18.5 mm full MX; vs ~3.5 mm MX ULP)
- Travel: ~1.0–1.2 mm actuation, ~3.2 mm total
- Life: ~50 million actuations
- Mount: Cherry low-profile keycap mount (not standard MX keycaps)
- Does NOT exist: a clicky or "Blue" MX Low Profile variant
5. Ordering & Compatibility
Requires a Cherry MX Low-Profile-compatible board and low-profile keycaps — not interchangeable with full MX, MX ULP, or Kailh Choc. Mostly pre-installed in OEM low-profile keyboards. Choose Red (standard linear) or Speed (faster).
6. Known Issues / DQ
- DQ: "Cherry MX Low Profile Blue Clicky" is fabricated — the line is linear-only (Red/Speed), no clicky/Blue. This entry should be corrected to a real variant (Red/Speed linear) or removed. Flagged.
- Practical care: short travel and a proprietary low-profile keycap ecosystem; OEM-oriented (not hot-swap enthusiast hardware).
Zdroj
- CHERRY MX Low Profile RGB (Red / Speed — linear only) — cherry.de
- CHERRY MX Low Profile RGB Speed linear switch — cherry.de
Specifikace
|
Actuation Force
The force needed to press the button. Lower = more sensitive. Sanwa ~65g (light), Seimitsu ~85g (medium), Happ ~130g (heavy).
|
50cN (50g)
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
Blue stem
|
|
Keycap compat
|
Cherry low-profile mount (not standard MX, not MX ULP, not Choc)
|
|
Mechanical Life
How many press cycles before mechanical failure. Higher is better — 10M cycles at 100 presses/day = 274 years.
|
50,000,000 cycles
|
|
Mounting Type
How the button attaches to the panel. Panel mount is standard — installs through a cutout from the front.
|
Cherry LP PCB mount
|
|
Pn note
|
No Cherry MX Low Profile Blue clicky exists. The MX Low Profile line is LINEAR-ONLY: RGB Red (~45cN) and RGB Speed (silver). Stored Blue stem / clicky are fabricated. Correct to a real variant (Red/Speed linear) or remove. (Ultra-flat Cherry = separate MX ULP line, #427.)
|
|
Pn status
|
fabricated (color + type)
|
|
Switch type
|
FABRICATED as clicky/Blue — Cherry MX Low Profile is LINEAR only (RGB Red + RGB Speed)
|
|
Travel Distance
How far the button moves when pressed. Shorter = faster response. Sanwa 0.85mm is extremely short for competitive gaming.
|
1.0mm actuation, 3.2mm total
|
Stručný průvodce instalací
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Rozměry
Řešení problémů
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Kde koupit
Cenové rozpětí
$72.15 — $166.58
across 2 sellers in US dollars
Stručné specifikace
- Actuation Force
- 50cN (50g)
- Color
- Blue stem
- Keycap compat
- Cherry low-profile mount (not standard MX, not MX ULP, not Choc)
- Mechanical Life
- 50,000,000 cycles
- Mounting Type
- Cherry LP PCB mount
Co říkají uživatelé
“Clicky version of Cherrys low-profile switch. Audible click in a slim package. Same Cherry LP proprietary mount (not Choc or MX compatible).”
Zjistit více
Další od Cherry
Cherry
80RETROS X HMX 1989 CLASSIC 45G LINEAR PCB MOUNT SWITCHES 35
80Retros x HMX 1989 Classic 45g Linear PCB Mount Switches 35 Pack
Cherry
80RETROS X HMX FJ400 50G LINEAR PCB MOUNT SWITCHES 35 PACK
80Retros x HMX FJ400 50g Linear PCB Mount Switches 35 Pack
Cherry
80RETROS X HMX JOKER 45G LINEAR PCB MOUNT SWITCHES 35 PACK
80Retros x HMX Joker 45g Linear PCB Mount Switches 35 Pack