Electrical Enclosure Accessories PUSH BUTTON MODULE 2 ROUND BUTTONS
Výzkumné poznámky
1. What this is
51011P2 is a ABB pushbutton.
2. Part-number decode
- Series: ABB 51011
- Type: pushbutton
3. Compatibility & ordering
ABB makes Modular (MP metal / CP plastic) 22mm command switches, CE compact switches, KP mushroom operators, and Jokab (2TLA) safety products. Match by type, actuation, illumination, sealing, and mounting, then use the manufacturer datasheet to confirm the exact contact and termination encoded in the part number.
4. Data-quality note
The exact ABB product line/configuration could not be confidently decoded from this part number. Kept and documented; flagged needs-verification.
5. Sources
- ABB product catalog (abb.com)
- Distributor listing (DigiKey / Mouser) — search the exact part number
Verified distributor data (Mouser)
- Official distributor description: Electrical Enclosure Accessories PUSH BUTTON MODULE 2 ROUND BUTTONS
- Price (from): 189.86 EUR
- Availability: Check Mouser for availability
This part is carried by Mouser Electronics; the description and datasheet above come straight from the distributor's catalog, confirming and expanding the part-number decode above.
Zdroj
- ABB — 51011P2 — abb.com
Specifikace
|
Device class
|
pushbutton
|
|
Enriched by
|
abb-decoder-2026-08-12
|
|
Lead time
|
0 Days
|
|
Manufacturer series
|
51011
|
|
Mouser checked
|
2026-09-28
|
|
Mouser description
|
Electrical Enclosure Accessories PUSH BUTTON MODULE 2 ROUND BUTTONS
|
|
Mouser matched
|
true
|
|
Mouser part number
|
894-51011P2
|
|
Pn status
|
verified
|
|
Series description
|
ABB 51011-series pushbutton / component
|
Stručný průvodce instalací
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Rozměry
Řešení problémů
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Stručné specifikace
- Device class
- pushbutton
- Enriched by
- abb-decoder-2026-08-12
- Lead time
- 0 Days
- Manufacturer series
- 51011
- Mouser checked
- 2026-09-28