LEKKER LINEAR45 MAGNETIC HE SWITCHES 12 PACK
ActiveWooting Lekker Linear45 Magnetic HE Switches 12 Pack
Magnetic Hall effect switches for use with PCBs with Hall effect sensors 30g starting force 45g bottom out force Adjustable actuation point from 0.1mm to 4.0mm Polycarbonate top housing Nylon bottom housing POM stem Non-magnetic steel spring Factory lubed Pack of 12 switches This switch use magnets instead of physical contacts to process actuations, creating a much smoother keypress without bounce or chatter. It requires a special PCB and is not compatible with regular mechanical keyboards. Due to manufacturing differences, this switch may not be compatible with all magnetic or Hall Effect keyboards.
Research Notes
1. What this is
Wooting Lekker Linear45 Magnetic HE Switches 12 Pack is a magnetic (Hall-effect) keyboard switch from Wooting. It is linear, magnetic/Hall-effect.
2. Spec decode (from product name)
- Switch type: linear
- Magnetic (Hall-effect): yes — analog/adjustable actuation (requires a compatible HE keyboard)
3. Compatibility & use
Standard MX-style keyboard switch — note: magnetic/Hall-effect switches only work in Hall-effect keyboards, not standard mechanical PCBs. Choose by feel (linear/tactile/clicky), actuation force, and sound (silent vs standard); 5-pin PCB-mount switches also fit plate-mount boards. Hot-swap or solder depending on your board.
4. Data-quality note
The switch type is decoded from the name; the exact actuation force and mount should be confirmed against the manufacturer's spec. Flagged decoded-partial. (Note: some of these rows are catalogued under a generic push-button/arcade-button category in the source data; the correct device class is keyboard switch, recorded in the specs above.)
5. Sources
- Wooting product page / keyboard-switch community databases
- Distributor / vendor listing — search the exact switch name
1 source
- Wooting Wooting Lekker Linear45 Magnetic HE Switches 12 Pack — keyboard-switch spec
Specifications
|
Device class
|
magnetic (Hall-effect) keyboard switch
|
|
Enriched by
|
keyboard-decoder-2026-08-12
|
|
Magnetic
|
true
|
|
Pn status
|
decoded-partial
|
|
Product type
|
Keyboard Switches
|
|
Series description
|
Wooting mechanical keyboard switch (linear)
|
|
Shopify id
|
9522549195052
|
|
Switch type
|
linear
|
|
Vendor
|
Wooting
|
Installation Quick Reference
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Dimensions
Troubleshooting
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Where to Buy
Price range
$8.5 — $8.5
from 1 seller in US dollars
Quick Specs
- Device class
- magnetic (Hall-effect) keyboard switch
- Enriched by
- keyboard-decoder-2026-08-12
- Magnetic
- true
- Pn status
- decoded-partial
- Product type
- Keyboard Switches
