Haimu Narutomaki Silent Linear Switch Narutomaki silent linears are a new budget option from Haimu featuring a full nylon construction with a POM stem and a light application of factory lube! Also utilized is a 55g single-stage spring for a satisfyingly smooth silent switch experience! Like the color and materials but want to customize the feel and sound? Check out our modding essentials for slow springs , switch films and more! Switch Type Silent Linear Manufacturer Haimu Top Housing Material Nylon Bottom Housing Material Nylon Stem Material POM Spring Weight 55g single-stage spring Mounting Pins 5-pin Factory Lube Yes
Research Notes
1. What this is
HAIMU NARUTOMAKI SILENT LINEAR ("Haimu Narutomaki Silent Linear Switch") is catalogued as a push-button / switch device.
2. What we know
- Manufacturer: not recorded (placeholder: "Stocked")
- Category: push-button / switch device
- Part number / name: HAIMU NARUTOMAKI SILENT LINEAR — Haimu Narutomaki Silent Linear Switch
- (no real manufacturer recorded — 'Stocked' is a source-catalog placeholder; identify the part from its name/number)
3. How to identify / order the exact part
The full specifications for this part are not machine-decodable from the data we hold. To confirm the exact configuration (contacts, rating, colour, mounting, protocol), search the part number/name on the manufacturer site or a distributor (DigiKey / Mouser / RS).
4. Data-quality note
This page is generated from the catalogued manufacturer, category, and product name. Per our keep-and-document policy we publish a page for every part we hold and state plainly what is known versus what needs verification, rather than deleting the row or inventing specs. Flagged decoded-partial.
5. Sources
- Distributor / marketplace listing — search "HAIMU NARUTOMAKI SILENT LINEAR" / "Haimu Narutomaki Silent Linear Switch"
1 source
- Stocked HAIMU NARUTOMAKI SILENT LINEAR — distributor/catalog
Specifications
|
Device class
|
push-button
|
|
Enriched by
|
generic-fallback-2026-08-12
|
|
Pn status
|
decoded-partial
|
|
Product type
|
Accessories
|
|
Shopify id
|
8063187189871
|
|
Vendor
|
Stocked
|
Installation Quick Reference
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Dimensions
Troubleshooting
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Quick Specs
- Device class
- push-button
- Enriched by
- generic-fallback-2026-08-12
- Pn status
- decoded-partial
- Product type
- Accessories
- Shopify id
- 8063187189871
