Emergency Stop Switches / E-Stop Switches EMERGENCY SWITCH
Research Notes
1. What this is
Shin Chin R13-930M-01-BR is a Shin Chin arcade pushbutton.
2. Spec decode (from product name)
- Size/family not stated in the product name — see the vendor listing.
3. Compatibility & use
Standard Japanese/US-style arcade pushbutton. Match by diameter (30mm main / 24mm start-aux), mounting (snap-in vs screw-in for panel thickness), shape (convex/concave), and finish; confirm the microswitch tab size for your wiring.
4. Data-quality note
Identified as a Shin Chin arcade part, but size/family were not stated in the name — confirm against the vendor listing. Flagged needs-verification.
5. Sources
- Shin Chin / arcade-parts vendor listing (Focus Attack, Paradise Arcade, Arcade Shock, arcadexpress.com)
- Slagcoin pushbutton guide (slagcoin.com/joystick/pushbuttons.html)
1 source
- Shin Chin Shin Chin R13-930M-01-BR — arcade-parts vendor
Specifications
|
Device class
|
arcade pushbutton
|
|
Enriched by
|
arcade-decoder-2026-08-12
|
|
Lead time
|
0 Days
|
|
Mouser part number
|
112-R13-930M-01-BR
|
|
Pn status
|
needs-verification
|
|
Rohs status
|
RoHS Compliant
|
|
Series description
|
Shin Chin arcade pushbutton
|
Installation Quick Reference
Panel cutout: 22mm. Mount with the yellow backing plate visible (required by EN/ISO 13850).
Wiring: Wire NC contacts in series with the safety relay input channels. Use dual-channel wiring for SIL 3 / PLe applications. Never wire directly to a motor contactor.
Testing: Press the e-stop and verify the machine stops within the required time. Test the reset mechanism. Repeat monthly per EN/ISO 13850.
Dimensions
Troubleshooting
E-stop won't reset (twist/pull doesn't release)
Check for debris in the mechanism. For twist-release: turn clockwise 45-90 degrees. For push-pull: pull straight out firmly. If the mechanism is stuck, the internal latch may be damaged — replace the entire head assembly.
Machine doesn't stop when e-stop is pressed
Critical safety issue. Immediately lock out the machine. Check wiring — NC contacts must be in series with the safety relay. Verify the safety relay is functioning. A broken wire in an NC circuit should cause a stop, so check for a wiring bypass.
Safety relay faults after e-stop reset
The safety relay detects a cross-fault between the two monitoring channels. Check that both NC contacts on the e-stop are switching simultaneously. One contact may be welded closed — replace the contact block.
Quick Specs
- Device class
- arcade pushbutton
- Enriched by
- arcade-decoder-2026-08-12
- Lead time
- 0 Days
- Mouser part number
- 112-R13-930M-01-BR
- Pn status
- needs-verification
