Excellent Japanese Seimitsu Arcade Push Button model PS-14-DN with 2.8mm wide terminals and Screw In thread.
Research Notes
1. Overview
The Seimitsu PS-14-DN is a 24 mm solid-color, screw-in pushbutton — the 24 mm screw-in for Start/aux positions on thick panels. D = 24 mm, N = screw-in, solid opaque plunger. Built-in microswitch; pairs with 30 mm G/GN mains.
2. Technical Specifications & Compatibility
See the structured specs on this page (diameter, mounting, plunger/finish, microswitch). These are standard arcade-button form factors — confirm the panel cutout (30 mm / 24 mm / 18 mm as applicable) and the snap-in vs screw-in mount for your panel thickness before ordering.
3. Sources
- https://focusattack.com/seimitsu-ps-14-dn-screwbutton/
- https://www.slagcoin.com/joystick/pushbuttons.html
2 sources
- Seimitsu PS-14-DN — 24 mm Solid-Color Screw-In Arcade Pushbutton — focusattack.com
- Seimitsu PS-14-DN — 24 mm Solid-Color Screw-In Arcade Pushbutton — www.slagcoin.com
Specifications
|
Arcade express id
|
670
|
|
Device type
|
Seimitsu PS-14-DN 24mm solid screw-in arcade pushbutton
|
|
Diameter
|
24mm
|
|
Finish
|
Solid/opaque plunger
|
|
Microswitch Type
The internal switch mechanism. Built-in = sealed unit. Cherry D44X = replaceable, clicky. Omron = quieter, longer life.
|
Built-in Seimitsu microswitch
|
|
Mounting Type
How the button attaches to the panel. Panel mount is standard — installs through a cutout from the front.
|
Screw-in
|
|
Reference pn
|
PS-14-DN (AX-670 is an Arcade Express catalog ID)
|
|
Weight kg
|
0.010000
|
Installation Quick Reference
Mounting: Snap-in buttons push into a 24mm hole from the top of the panel. Screw-in buttons thread from below and secure with a nut. Use 2-3mm acrylic, wood, or metal panel.
Wiring: Connect the microswitch terminals to your encoder or PCB. Common ground shared across all buttons. Quick-disconnect (0.110") terminals are standard on Japanese buttons.
Dimensions
Troubleshooting
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
Quick Specs
- Arcade express id
- 670
- Device type
- Seimitsu PS-14-DN 24mm solid screw-in arcade pushbutton
- Diameter
- 24mm
- Finish
- Solid/opaque plunger
- Microswitch Type
- Built-in Seimitsu microswitch
