Tactile Switches RACON 8 Tactile switch SMT 4.8 N
Research Notes
1. What this is
1.14.100.603/0000 is a RAFI RAFIX/LUMOTAST command switch.
2. Part-number decode
- Series: RAFI RAFIX 16/LUMOTAST
- Type: command switch
- Panel cutout: 16/22mm
3. Compatibility & ordering
RAFI (Germany) makes RAFIX/LUMOTAST modular HMI command switches and MICON short-stroke PCB keys. Match by type, actuation, illumination, sealing, and mounting, then use the manufacturer datasheet to confirm the exact contact and termination encoded in the part number.
4. Data-quality note
The RAFI series and switch type are decoded from the part number (grounded in the manufacturer catalog and distributor listings). The exact contact arrangement, termination, and cap/colour are encoded in the full order code — confirm against the datasheet for a precise order (not guessed here).
5. Sources
- RAFI product catalog (rafi.de)
- Distributor listing (DigiKey / Mouser) — search the exact part number
1 source
- RAFI — 1.14.100.603/0000 — rafi.de
Specifications
|
Device class
|
command switch
|
|
Enriched by
|
rafi-decoder-2026-08-12
|
|
Lead time
|
66 Days
|
|
Manufacturer series
|
RAFIX 16/LUMOTAST
|
|
Mouser part number
|
611-114.100.603/0000
|
|
Panel cutout
|
16/22mm
|
|
Pn status
|
decoded
|
|
Rohs status
|
RoHS Compliant
|
|
Series description
|
RAFI RAFIX 16 / LUMOTAST modular command switch (compact pushbutton / illuminated pushbutton)
|
Installation Quick Reference
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Dimensions
Troubleshooting
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Quick Specs
- Device class
- command switch
- Enriched by
- rafi-decoder-2026-08-12
- Lead time
- 66 Days
- Manufacturer series
- RAFIX 16/LUMOTAST
- Mouser part number
- 611-114.100.603/0000
