RMQ-M22-D-G
ActiveRMQ M22 Green Flush Push Button
Moeller RMQ-Titan M22 green push button — pre-Eaton branding.
Common Applications
Same button as the Eaton M22-D-G — just the old Moeller branding. If the machine was built in Germany/Austria/Czech Republic between 2000-2008, you will see Moeller on the panel door. Eaton part numbers cross-reference directly. No functional difference.
Compatibility
Identical to Eaton M22-D-G. Eaton acquired Moeller in 2008. All Moeller M22 parts are directly interchangeable with Eaton M22 parts. Same contact blocks, same mounting, same accessories. Just different branding on the button head.
Specifications
|
Actuator Type
The button head style. Flush sits level with the bezel (prevents accidental presses). Extended protrudes for easy access.
|
Flush
|
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
CE
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
Green
|
|
Cutout Diameter
The hole size you drill in your panel to mount this button. 22mm is the most common industrial standard worldwide.
|
22.5mm
|
|
IP Rating
IP67: Dust-tight and survives temporary water submersion (1m for 30 min). Handles oil splashes, steam cleaning, and rain.
|
IP67 (front)
|
|
Material
The bezel/body material. Metal bezels are more durable in harsh environments. Plastic is lighter and cheaper.
|
Plastic/Metal bezel
|
Installation Quick Reference
Panel cutout: 22.5mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Dimensions
Troubleshooting
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Where to Buy
Price range
$33.43 — $69.48
across 2 distributors
Quick Specs
- Actuator Type
- Flush
- Certifications
- CE
- Color
- Green
- Cutout Diameter
- 22.5mm
- IP Rating
- IP67 (front)
What People Are Saying
“Same button as the Eaton M22-D-G — just the old Moeller branding. If the machine was built in Germany/Austria/Czech Republic between 2000-2008, you will see Moeller on the panel door. Eaton part numbe”