Eaton · M22 Series

M22-D-R-K01

Active
UL CSA CE

M22 Red Complete Push Button 1NC

Part number: M22 - D - K01
Eaton M22 Series Introduced circa 2000

Eaton M22 complete red push button with 1NC contact.

Common Applications

Complete stop button. One Eaton part number, ready to mount. Red + 1NC for stop circuits.

Research Notes

1. Overview

The Eaton M22-D-R-K01 is a complete, pre-assembled industrial pushbutton from the RMQ-Titan M22 series — one of Eaton's flagship 22.5mm IEC pilot device lines. It combines a flush red actuator with a factory-installed 1NC (normally closed) contact block (M22-K01), making it a ready-to-install unit in a standard 22.5mm panel cutout. Eaton markets this under both the Eaton and legacy Moeller/Cutler-Hammer brands. The red color and 1NC contact configuration make it the canonical STOP-button solution in industrial machine control panels.


2. User Sentiment

No first-person user forum reviews or community ratings were found among the 391 findings. The product is widely stocked and actively distributed through major industrial distributors globally (Mouser, DigiKey, Newark, RS Online, Grainger, Radwell, and many regional distributors), which indicates strong and sustained commercial demand. The surplus/refurbished market (Radwell, B2E Surplus, Machinio) actively carries factory-sealed units, suggesting the part is well-established and long-lived in production. Pricing observed ranges from ~$23.94 (Legend Electrical) to ~$43.42 (RAMCOI), with eBay surplus as low as $33.00 — suggesting consistent availability without significant obsolescence pressure.


3. Real-World Applications

The M22-D-R-K01 is designed for global machine control applications across industrial automation, motor control panels, and manufacturing equipment. The red flush momentary form factor with 1NC contact is the standard configuration for machine stop functions per IEC safety conventions. The IEC 60947-5-1 / UL / CSA ratings make it suitable for North American and international panel builds. The product appears across markets in Europe (Germany, Spain, Italy), North America, South America (Brazil, Mexico), and Asia (India, Singapore), and is found in categories including Motor Control and Pilot Devices.


4. Technical Specifications

  • Type: Non-illuminated flush momentary pushbutton, complete assembled device
  • Color: Red (actuator/cap)
  • Bezel: Silver (titanium-finished plastic, non-metallic)
  • Contact Configuration: 1NC (1 normally closed, SPST-NC)
  • Mounting: Flush, panel mount front
  • Hole Size: 22.5mm (22.3mm panel cutout diameter)
  • Operation: Momentary (spring-return)
  • Switching Current: 6A (rated); some sources cite 10A at 500VAC (contact block rating)
  • Voltage Rating: 500V AC/DC
  • IP Rating: IP67, IP69K
  • NEMA Rating: NEMA 4X, NEMA 13
  • Mechanical Life: 5,000,000 operations
  • Operating Temperature: -25°C to +70°C
  • Terminal Type: Screw terminals
  • Dimensions: Height 2.16 in (54.9mm), Length 1.46 in (37mm), Width 1.18 in (30mm)
  • Weight: 0.03 kg
  • Series: M22 / RMQ-Titan
  • Eaton Article Number: 132618 (BVP blister-pack variant); UPC 786685276229
  • Certifications: CE, CSA, UL, GoST-R (Russia), Bureau Veritas CCC (China), Lloyd's Register
  • Country of Origin: Germany (DE)
  • CAD Models: Available via TraceParts in SOLIDWORKS, CATIA, Inventor, Creo, STEP, IGES, DWG

5. Ordering & Compatibility

The M22-D-R-K01 is the standard screw-terminal complete unit; the M22-D-R-K01-B100 is the pressure-connection (spring-cage) variant. The M22-D-R-K01-BVP is the retail blister-pack packaging variant (Eaton article 132618, EAN 4015081295630). In the Brazilian market, catalog number 70024731 is also referenced. The -K01 suffix denotes inclusion of the M22-K01 (1NC) contact block; the companion M22-D-R-K10 adds a 1NO contact instead. The M22 platform is modular: actuators, contact blocks, and bases can be ordered and assembled separately, or as complete units. Compatible accessories include additional contact blocks (M22-K01, M22-K10, M22-K01-E), legend plates, and spring-cage adapter bases (M22-A). DigiKey part number: 5730-M22-D-R-K01-ND. Newark part: 09P6107. Pricing at major distributors ranges from approximately $24 to $44 USD new.


6. Known Issues

One minor data discrepancy observed: some sources (DigiKey, GlobalSpec) list the contact configuration as DPST-NC while others (Newark, OEM Secrets) list SPST-NC. This likely reflects whether the internal NC contact circuit is counted as one or two poles — the actual contact block (M22-K01) provides a single NC switching element. GoVets title mentions "1NO/1NC" but the product body specs confirm 1NC only. The Italian-language WI Automation listing shows "13,500,000 operations" which is a decimal-separator formatting artifact of the "5,000,000" figure (Italian uses period as thousands separator). No structural defects, failure modes, or user complaints were identified in the research corpus.


29 sources
  1. M22-D-R-K01 | Eaton M22 modular pushbutton | Eaton — eaton.com
  2. Eaton M22-D-R-K01 red 22MM momentary pushbutton with 1 M22-K01 normally closed contact block — imc-direct.com
  3. Eaton - Cutler Hammer M22-D-R-K01 Pushbutton Switch,22mm,Red,Momentary,Flush Button,6A,500V,RMQ-Titan Series — rs-online.com
  4. M22-D-R/K01 - Newark Electronics — newark.com
  5. PDF Eaton M22-D-R-K01 spec sheet — electricalpowersource.com
  6. Datasheet - M22-D-R-K01-BVP - Data sheet Engine - Eaton — datasheet.eaton.com
  7. Eaton Moeller series M22 Pushbutton - 132618 Overview | Eaton — eaton.com.cn
  8. M22-D-R-K01 Eaton Electrical | Pushbutton Switches | DigiKey — digikey.com
  9. M22-D-R-K01 Eaton Electrical | Mouser — mouser.com
  10. M22-D-R/K01 - Newark Electronics (Brazil/PT) — newark.com
  11. M22-d-r-k01 Eaton Corporation — Eaton IEC complete device specs — ramcoi.com
  12. EATON M22-D-R-K01 | Controller Services Hammond Products — hammondenclosuresonline.com
  13. Non-Illuminated, Flush Profile, Flush Push Button Operator — Grainger 60JP06 — grainger.com
  14. M22-D-R-K01 Pushbutton by CUTLER HAMMER - Radwell International — radwell.com
  15. M22-D-R-K01 Pushbutton by CUTLER HAMMER - Radwell Canada — radwell.ca
  16. PDF Specifications - EATON M22-D-R-K01 Specification Sheet — adhq.com
  17. M22-D-R-K01-BVP 132618 EATON ELECTRIC Pushbutton — electricautomationnetwork.com
  18. M22-D-R-K01-BVP 132618 EATON Pulsador rasante 22mm rojo 1NC Titanio (ES) — electricautomationnetwork.com
  19. M22-D-R-K01-BVP 132618 Eaton кнопка 1 NC (RU) — electricautomationnetwork.com
  20. PDF Eaton Corp M22DRK01 — GoST-R, CCC, CSA, Lloyd's Register, CE certified — elliottelectric.com
  21. PDF M22 Pushbutton Complete Device M22-D-R-K01 — IESA Costa Rica — iesacr.com
  22. PDF Eaton M22-D-R-K01 — PowerEdge dimensions UPC 786685276229 — kempstoncontrols.com
  23. Botão de Comando Pulsante Eaton M22-D-R/K01 70024731 (Brazil) — eletropecas.com.br
  24. M22-D-R/K01 Botao Pulsante Vermelho 1nf 70024731 Eaton - Juncao (Brazil) — juncao.com.br
  25. Eaton M22 modular pushbutton M22-D-R-K01 — 3D CAD models — traceparts.com
  26. Eaton M22-D-R-K01 Modular Pushbutton, M22 Series, 22.5mm — rspsupply.com
  27. M22-D-R/K01 datasheet — PB SWITCH SPST-NC 10A 500VAC SCREW — digchip.com
  28. Non-ill Mom Pb Sil-bzl Flsh Red 1no/1nc M22-D-R-K01 - GoVets (COO: Germany) — govets.com
  29. M22-D-R-K01-B100 | Eaton M22 modular pushbutton (pressure connection variant) — eaton.com

Specifications

Actuator Type
Flush
Certifications
UL, CSA, CE
Color
Red
Contact Configuration
1NC
Cutout Diameter
22.5mm
IP Rating
IP67 (front)
Series
M22

Installation Quick Reference

Panel cutout: 22.5mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Dimensions

Front 22.5mm cutout panel hole diameter Side panel contact ~45mm depth

Wiring Diagram

L T 21 22 NC (closed) opens on press

Troubleshooting

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Quick Specs

Actuator Type
Flush
Certifications
UL, CSA, CE
Color
Red
Contact Configuration
1NC
Cutout Diameter
22.5mm

What People Are Saying

+

“Complete stop button. One Eaton part number, ready to mount. Red + 1NC for stop circuits.”

Reddit r/PLC 19 upvotes View thread →