MX2A-G1NB

Active

CHERRY MX2A-G1NB

Cherry MX2A-G1NB — CHERRY MX2A-G1NB

Pushbutton Switches MX RGB Tactile Switch, 2-12VAC/DC

Research Notes

1. What this is

MX2A-G1NB ("CHERRY MX2A-G1NB") is catalogued as a push-button / switch device from Cherry.

2. What we know

  • Manufacturer: Cherry
  • Category: push-button / switch device
  • Part number / name: MX2A-G1NB — CHERRY MX2A-G1NB
  • Cherry — see the manufacturer's catalog for this part.

3. How to identify / order the exact part

The full specifications for this part are not machine-decodable from the data we hold. To confirm the exact configuration (contacts, rating, colour, mounting, protocol), search the Cherry catalog for this part number on the manufacturer site or a distributor (DigiKey / Mouser / RS).

4. Data-quality note

This page is generated from the catalogued manufacturer, category, and product name. Per our keep-and-document policy we publish a page for every part we hold and state plainly what is known versus what needs verification, rather than deleting the row or inventing specs. Flagged decoded-partial.

5. Sources

  • Cherry product catalog — search "MX2A-G1NB" / "CHERRY MX2A-G1NB"

1 source
  1. Cherry MX2A-G1NB — distributor/catalog

Specifications

Device class
push-button
Enriched by
generic-fallback-2026-08-12
Lead time
12 Days
Mouser part number
540-MX2A-G1NB
Pn status
decoded-partial
Rohs status

Installation Quick Reference

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Dimensions

Troubleshooting

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Photos & Drawings

Images: mouser.com

Quick Specs

Device class
push-button
Enriched by
generic-fallback-2026-08-12
Lead time
12 Days
Mouser part number
540-MX2A-G1NB
Pn status
decoded-partial