KSC241GLFS
ActiveKSC2 Sealed Tactile Switch IP67
C&K KSC2 sealed tactile switch — IP67 rated for outdoor/automotive.
Common Applications
Sealed tactile switch for harsh environments. IP67 means it survives water jets and temporary submersion. Used in outdoor equipment controls, automotive dashboard buttons, and marine electronics where standard unsealed tactile switches would fail from moisture ingress.
Specifications
|
Actuation Force
The force needed to press the button. Lower = more sensitive. Sanwa ~65g (light), Seimitsu ~85g (medium), Happ ~130g (heavy).
|
200gf
|
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
IP67, AEC-Q200
|
|
IP Rating
IP67: Dust-tight and survives temporary water submersion (1m for 30 min). Handles oil splashes, steam cleaning, and rain.
|
IP67
|
|
Mechanical Life
How many press cycles before mechanical failure. Higher is better — 10M cycles at 100 presses/day = 274 years.
|
1,000,000 cycles
|
|
Mounting Type
How the button attaches to the panel. Panel mount is standard — installs through a cutout from the front.
|
Through-hole PCB
|
|
Travel Distance
How far the button moves when pressed. Shorter = faster response. Sanwa 0.85mm is extremely short for competitive gaming.
|
0.3mm
|
Installation Quick Reference
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Dimensions
Troubleshooting
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Where to Buy
Price range
$1.91 — $113.3
across 2 distributors
Quick Specs
- Actuation Force
- 200gf
- Certifications
- IP67, AEC-Q200
- IP Rating
- IP67
- Mechanical Life
- 1,000,000 cycles
- Mounting Type
- Through-hole PCB
What People Are Saying
“Sealed tactile switch for harsh environments. IP67 means it survives water jets and temporary submersion. Used in outdoor equipment controls, automotive dashboard buttons, and marine electronics where”