P2AP4

Active

Altech P2AP4

Altech P2AP4 — Altech P2AP4

Series picture: the seller uses it for 3 other parts too, so it may not show this exact version.

Switch Actuators Push Button Oper., 22 mm,

Research Notes

1. What this is

P2AP4 is an Altech 2AP-series 22mm flush pushbutton operator.

2. Part-number decode

  • Series: Altech 2AP

3. Compatibility & ordering

Altech 22/30mm pushbuttons are cost-effective IEC-style panel operators. Match by size (22mm), operator material (metal vs plastic), illumination (and voltage), action, and contact blocks; cross-reference to Schneider Harmony, Allen-Bradley 800F, Siemens 3SU, or Eaton M22 by the same attributes if needed.

4. Data-quality note

The Altech series family is identified, but the exact operator style/contact config is not fully determinable from the part number alone — treat as indicative and confirm against Altech's datasheet. Flagged decoded-partial.

5. Sources

  • Altech Corp datasheet / 22mm pushbutton tech specs (altechcorp.com)
  • Distributor listing (Mouser / Future Electronics) — search the exact part number

1 source
  1. Altech Corp — P2AP4 — altechcorp.com

Specifications

Device class
pushbutton
Enriched by
altech-decoder-2026-08-12
Lead time
49 Days
Manufacturer series
2AP
Mouser part number
845-P2AP4
Pn status
decoded-partial
Rohs status
Series description
Altech 2AP-series 22mm flush pushbutton operator

Installation Quick Reference

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Dimensions

Troubleshooting

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Photos & Drawings

Images: mouser.com

Quick Specs

Device class
pushbutton
Enriched by
altech-decoder-2026-08-12
Lead time
49 Days
Manufacturer series
2AP
Mouser part number
845-P2AP4