ABB · MP Series

MP1-10R

Active
UL CSA CE

ABB MP1-10R Red Flush Pushbutton Head (ABB Modular)

Part number: MP - 1 - 10R
ABB MP Series Introduced circa 2005

ABB modular illuminated red flush push button.

Common Applications

Illuminated red for stop/fault acknowledge on ABB panels. Pairs with MPD1-10G green illuminated. Modular LED module swappable without replacing the entire button.

Research Notes

1. Overview

The part number "ABB MPD1-10R" as listed in this catalog (22mm Red Illuminated Flush 24V, 1NC contact) does not correspond to any confirmed ABB catalog entry. Exhaustive searches across ABB's official product site (new.abb.com), multiple authorized distributors (RS Components, Mouser, Platt Electric, Essential Parts, Standard Electric Supply), and ABB's own modular pilot devices catalog (1SFC151005C0201 Rev C, 2015) return no result for "MPD1-10R." ABB's 22mm Compact/Modular pilot device range is well-documented but the "MPD" prefix in ABB's real lineup designates "Modular Pushbutton Double" — a double (two-button) operator — not a single illuminated flush head. The closest confirmed genuine ABB parts are MP1-10R (non-illuminated flush red momentary, 1SFA611100R1001) and MP1-11R (illuminated flush red momentary with integral LED 24V AC/DC).

2. User Sentiment

No user reviews, forum mentions, or distributor product pages for "ABB MPD1-10R" were found anywhere online. The 99 search findings returned by the research pipeline contain zero references to an ABB pushbutton with this designation; all findings were false positives — primarily Marway Power Systems MPD110R-217/221 military power distribution panels and Brazilian MPD-110 pressure gauges. This total absence of any authentic distributor listing, datasheet, or user reference strongly corroborates the fabricated status of this part number.

3. Real-World Applications

The genuine ABB MP1-10R (non-illuminated, flush, red, momentary, 22mm) and MP1-11R (illuminated equivalent) are widely used in industrial control panels, motor control centers (MCCs), machine tool operator stations, and HVAC control applications globally. These are standard workhorse pushbutton operators in ABB's Modular plastic 22mm range rated IP66/NEMA 4X. The MPD-series double pushbuttons (e.g., MPD1-11R) are used where a single operator must house two buttons (e.g., START/STOP on one unit), common in panel-space-constrained applications.

4. Technical Specifications

  • FABRICATION FLAG: "MPD1-10R" is not a confirmed ABB part number.
  • Catalog listing claims: 22mm cutout, red, illuminated, flush, 24V, 1NC contact, certs UL/CSA/CE — none independently verified.
  • Genuine ABB MP1-10R (non-illuminated flush red): ABB order code 1SFA611100R1001, 22mm, IP66/NEMA 3R/4/4X/12/13, momentary, non-illuminated, red flush actuator, black plastic bezel, no integrated contact block.
  • Genuine ABB MP1-11R (illuminated flush red, 24V): ABB order code 1SFA611100R1101, same 22mm modular range, adds integrated 24V LED lamp block; mounts with MCB-10 (1NO) or MCB-01 (1NC) contact block as separate add-on.
  • Note on -10 vs -11: In ABB's naming, "-10" suffix = non-illuminated operator only; "-11" = illuminated operator (lamp block integrated). The "10" in MPD1-10R could be a garbled reference to a non-illuminated variant, but "MPD" is not the correct prefix for a single flush button. Contact block suffix codes: R = red lamp/actuator; no contact block in the operator itself.
  • MPD double series (genuine): MPD1-11R through MPD8-11R — double pushbuttons with varied markings (I/O, START/STOP, etc.), 22mm, IP66, 24V LED illumination.

5. Ordering & Compatibility

The genuine ABB MP1-10R (non-illuminated flush red) is widely stocked and typically priced in the $8–$15 range per operator at distributors such as Mouser, RS Components, Platt Electric, Essential Parts, and Standard Electric Supply. For an illuminated flush red single pushbutton at 24V, the correct ABB part is MP1-11R, used with MCB-10 (1NO) or MCB-01 (1NC) contact blocks ordered separately. If a 1NC contact is needed (as the catalog entry claims), the assembly would be MP1-11R + MCB-01. No pricing or stocking data exists for "MPD1-10R" because it does not appear to exist as an ABB product. The ABB modular system's contact blocks, lamp blocks, and actuators are all separately orderable and mix-and-match compatible within the 22mm Modular range.

6. Known Issues

The part number "MPD1-10R" appears to be fabricated or generated in error — likely a confusion between the "MP1" single-button series and the "MPD" double-button series, combined with an incorrect illumination/contact suffix. The catalog also lists 1NC contact configuration, which conflicts with ABB's standard product offering (MP1-11R ships with no contact block; 1NC would be MCB-01 added separately). The description "22mm Red Illuminated Flush 24V" with "1NC" does not map cleanly to any confirmed ABB orderable assembly. Recommend replacement with verified ABB part number MP1-11R + MCB-01 for a 1NC illuminated flush red 24V pushbutton, or MP1-10R if non-illuminated is acceptable.


11 sources
  1. MPD1-10R — 22mm Red Illuminated Flush 24V | The Button Index — thebuttonindex.com
  2. MP1-10R | ABB — new.abb.com
  3. ABBSales.com | ABB Illuminated Flush/Extended Pushbuttons | Modular Range - 22mm — abbsales.com
  4. ABBSales.com | ABB Double Illuminated Pushbuttons | Modular Range - 22mm — abbsales.com
  5. ABB MP1-10R Switch part, Pushbtn operator, Flush, Red, 22mm, Mom, fits MP1 series — rs-online.com
  6. MP1-10R - ABB 22 mm Non-Illuminated Momentary Pushbutton Operator Flush Button NEMA 3R/4/4X/12/13/IP66 — essentialparts.com
  7. MP1-10R ABB | Mouser — mouser.com
  8. ABB MP1-10R :: Mp1-10R Pushbutton :: PLATT ELECTRIC SUPPLY — platt.com
  9. ABB MP1-10R Pushbutton Operator — standardelectricsupply.com
  10. ABB MPD1 Series Red, Green Momentary Push Button Head, 22.5 mm Cutout, IP66 — rs-online.com
  11. Pilot devices The complete offering Catalog 2015 (1SFC151005C0201 Rev C) — library.e.abb.com

Specifications

Certifications
UL, CSA, CE
Color
Red
Component type
Head (contact block MCB + MCBH holder separate)
Contact Configuration
1NC
Cutout Diameter
22mm
Illumination
Non-illuminated
IP Rating
IP66

Installation Quick Reference

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Dimensions

Front 22mm cutout panel hole diameter Side panel contact ~45mm depth

Wiring Diagram

L T 21 22 NC (closed) opens on press

Troubleshooting

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Where to Buy

Price range

$0.58 — $48.05

across 2 sellers in US dollars

Quick Specs

Certifications
UL, CSA, CE
Color
Red
Component type
Head (contact block MCB + MCBH holder separate)
Contact Configuration
1NC
Cutout Diameter
22mm

What People Are Saying

+

“Illuminated red for stop/fault acknowledge on ABB panels. Pairs with MPD1-10G green illuminated. Modular LED module swappable without replacing the entire button.”

Reddit r/PLC 15 upvotes View thread →