KPR3-100R

Active

ABB KPR3-100R

Part number: 100R
ABB KPR3-100R — ABB KPR3-100R

Switch Actuators RESET BUTTON,FLUSH,RED,W/SHAFT

Research Notes

1. What this is

KPR3-100R is a ABB KP mushroom/e-stop.

2. Part-number decode

  • Series: ABB KP mushroom
  • Type: emergency-stop

3. Compatibility & ordering

ABB makes Modular (MP metal / CP plastic) 22mm command switches, CE compact switches, KP mushroom operators, and Jokab (2TLA) safety products. Match by type, actuation, illumination, sealing, and mounting, then use the manufacturer datasheet to confirm the exact contact and termination encoded in the part number.

4. Data-quality note

The ABB product line/type is identified; the detailed configuration is left to the datasheet rather than guessed. Flagged decoded-partial.

5. Sources

  • ABB product catalog (abb.com)
  • Distributor listing (DigiKey / Mouser) — search the exact part number

1 source
  1. ABB — KPR3-100R — abb.com

Specifications

Device class
emergency-stop
Enriched by
abb-decoder-2026-08-12
Lead time
18 Days
Manufacturer series
KP mushroom
Mouser part number
894-KPR3-100R
Pn status
decoded-partial
Rohs status
Series description
ABB KP-series mushroom / emergency-stop pushbutton operator

Installation Quick Reference

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Dimensions

Troubleshooting

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Photos & Drawings

Images: mouser.com

Quick Specs

Device class
emergency-stop
Enriched by
abb-decoder-2026-08-12
Lead time
18 Days
Manufacturer series
KP mushroom
Mouser part number
894-KPR3-100R