Do you remember our Zealio V1s? Do you miss typing on a medium tactile switch with a bump mid way through the keypress? There has been a lack of medium tactile switches lately, so we are looking forward to fill in that gap once again. It has been three years since the retirement of our original Zealio V1 switches. We are excited to announce and bring back the switch that spearheaded the boutique switch market back in 2015! Introducing our latest Zealio V1 Redux switches: 62g or 67g Bottom Out 5 Pin "PCB Mount" Fully Opaque Nylon Housing POM Stem OG Zealio V1 Stem Mold Medium Tactile, Bump Mid-Travel Two Pin Through Hole LED Support No SMD LED Cutout Underneath For Optimum Switch Acoustics, aka "thock" 1 order = 10x switches
ملاحظات البحث
1. What this is
Zealio® V1 Redux Switches is a mechanical keyboard switch from Zeal.
2. Spec decode (from product name)
- Type/force not stated in the product name — see the manufacturer spec.
3. Compatibility & use
Standard MX-style keyboard switch. Choose by feel (linear/tactile/clicky), actuation force, and sound (silent vs standard); 5-pin PCB-mount switches also fit plate-mount boards. Hot-swap or solder depending on your board.
4. Data-quality note
This is identified as a Zeal keyboard switch, but the type/force were not stated in the name — confirm the full spec against the manufacturer. Flagged needs-verification. (Note: some of these rows are catalogued under a generic push-button/arcade-button category in the source data; the correct device class is keyboard switch, recorded in the specs above.)
5. Sources
- Zeal product page / keyboard-switch community databases
- Distributor / vendor listing — search the exact switch name
المصدر
- Zeal Zealio® V1 Redux Switches — keyboard-switch spec
المواصفات
|
Device class
|
mechanical keyboard switch
|
|
Enriched by
|
keyboard-decoder-2026-08-12
|
|
Pn status
|
needs-verification
|
|
Product type
|
Group Buy
|
|
Series description
|
Zeal mechanical keyboard switch
|
|
Shopify id
|
6578234785856
|
|
Vendor
|
Zeal Generation Inc.
|
مرجع سريع للتركيب
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
الأبعاد
استكشاف الأعطال وإصلاحها
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
مواصفات سريعة
- Device class
- mechanical keyboard switch
- Enriched by
- keyboard-decoder-2026-08-12
- Pn status
- needs-verification
- Product type
- Group Buy
- Series description
- Zeal mechanical keyboard switch
