Wuque MM Switch are Mix & Match switches by Wuque and manufactured by JWK. These packs of housings and stems allow you to create a completely custom switch of your choice in fun pastel colorways. It comes in three different housing materials and four different stem materials for a total of 36 different combinations. Wuque MM Switch Bottom Housings Feature: 35 included in each pack Manufactured by JWK Gold-Plated Contact Leaf PCB Mount, 5-Pin Available Materials and Colors: Modified Nylon - Blue UHMWPE - Purple Modified POM - Pink MM Switch Series Components: MM Switch Stems MM Switch Top Housings Springs Includes: 35 Wuque MM Switch Bottom Housings
ملاحظات البحث
1. What this is
Wuque Studio Wuque MM Switch Bottom Housings is a mechanical keyboard switch from Wuque Studio.
2. Spec decode (from product name)
- Type/force not stated in the product name — see the manufacturer spec.
3. Compatibility & use
Standard MX-style keyboard switch. Choose by feel (linear/tactile/clicky), actuation force, and sound (silent vs standard); 5-pin PCB-mount switches also fit plate-mount boards. Hot-swap or solder depending on your board.
4. Data-quality note
This is identified as a Wuque Studio keyboard switch, but the type/force were not stated in the name — confirm the full spec against the manufacturer. Flagged needs-verification. (Note: some of these rows are catalogued under a generic push-button/arcade-button category in the source data; the correct device class is keyboard switch, recorded in the specs above.)
5. Sources
- Wuque Studio product page / keyboard-switch community databases
- Distributor / vendor listing — search the exact switch name
المصدر
- Wuque Studio Wuque MM Switch Bottom Housings — keyboard-switch spec
المواصفات
|
Device class
|
mechanical keyboard switch
|
|
Enriched by
|
keyboard-decoder-2026-08-12
|
|
Pn status
|
needs-verification
|
|
Product type
|
Switches
|
|
Series description
|
Wuque Studio mechanical keyboard switch
|
|
Shopify id
|
6880374063169
|
|
Vendor
|
Wuque Studio
|
مرجع سريع للتركيب
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
الأبعاد
استكشاف الأعطال وإصلاحها
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
مواصفات سريعة
- Device class
- mechanical keyboard switch
- Enriched by
- keyboard-decoder-2026-08-12
- Pn status
- needs-verification
- Product type
- Switches
- Series description
- Wuque Studio mechanical keyboard switch
![[IN STOCK] WS ONION](https://cdn.shopify.com/s/files/1/0403/9809/4489/products/2_2004dcee-007b-4bcd-b220-6a44d204cb33.jpg?v=1636980069)
![[IN STOCK] WS STABS AURORA SERIES](https://cdn.shopify.com/s/files/1/0403/9809/4489/products/Stab_AuroraFog_4_1_1.png?v=1636435292)
![[IN STOCK] WS STABS V3](https://cdn.shopify.com/s/files/1/0403/9809/4489/products/DSC01873.jpg?v=1681976170)