COM-11275

نشط

SparkFun COM-11275

SparkFun COM-11275 — SparkFun COM-11275

SparkFun Accessories It's the end of the world and you need a button to press. This is it. A 100mm diameter (outside diameter) dome illuminated push button comes with an LED securing nut and a pre-installed long life horizontal microswitch. Button can also be adjusted

ملاحظات البحث

1. What this is

COM-11275 ("SparkFun COM-11275") is catalogued as a smart-home control device (button / switch / remote / knob) from SparkFun.

2. What we know

  • Manufacturer: SparkFun
  • Category: smart-home control device (button / switch / remote / knob)
  • Part number / name: COM-11275 — SparkFun COM-11275
  • SparkFun makes smart-home / IoT devices (typically Zigbee, Matter, or Wi-Fi). This entry is a smart-home control device (button / switch / remote / knob); the product name describes its function.

3. How to identify / order the exact part

The full specifications for this part are not machine-decodable from the data we hold. To confirm the exact configuration (contacts, rating, colour, mounting, protocol), search the SparkFun catalog for this part number on the manufacturer site or a distributor (DigiKey / Mouser / RS). For smart-home devices, confirm the wireless protocol (Zigbee / Matter / Wi-Fi / Thread) and hub compatibility.

4. Data-quality note

This page is generated from the catalogued manufacturer, category, and product name. Per our keep-and-document policy we publish a page for every part we hold and state plainly what is known versus what needs verification, rather than deleting the row or inventing specs. Flagged needs-verification.

5. Sources

  • SparkFun product catalog — search "COM-11275" / "SparkFun COM-11275"

المصدر
  1. SparkFun COM-11275 — distributor/catalog

المواصفات

Device class
push-button
Enriched by
generic-fallback-2026-08-12
Lead time
15 Days
Mouser part number
474-COM-11275
Pn status
needs-verification
Rohs status

مرجع سريع للتركيب

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

الأبعاد

استكشاف الأعطال وإصلاحها

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

الصور والرسومات

الصور: mouser.com

مواصفات سريعة

Device class
push-button
Enriched by
generic-fallback-2026-08-12
Lead time
15 Days
Mouser part number
474-COM-11275
Pn status
needs-verification