Excellent Japanese Seimitsu brand Arcade Push Button model PS-14-D with 2.8mm wide terminals and 24mm diameter.
المواصفات
|
Arcade express id
|
386
|
|
Weight kg
|
0.010000
|
مرجع سريع للتركيب
Mounting: Snap-in buttons push into a 30mm hole from the top of the panel. Screw-in buttons thread from below and secure with a nut. Use 2-3mm acrylic, wood, or metal panel.
Wiring: Connect the microswitch terminals to your encoder or PCB. Common ground shared across all buttons. Quick-disconnect (0.110") terminals are standard on Japanese buttons.
الأبعاد
استكشاف الأعطال وإصلاحها
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
مواصفات سريعة
- Arcade express id
- 386
- Weight kg
- 0.010000
