Schneider Electric · Harmony XB5 السلسلة

ZB5-AA4

نشط
UL CSA CE

22mm Red Flush Push Button Plastic XB5

رقم القطعة: ZB5 - A - A - 4
Schneider Electric Harmony XB5 السلسلة Introduced circa 2003

Schneider Harmony XB5 red push button — budget plastic.

التطبيقات الشائعة

Plastic version of the metal XB4-BA4. Same contact blocks, same 22mm mounting. Use for indoor stop buttons where the budget matters more than aesthetics.

المواصفات

Actuator Type
Flush
Certifications
UL, CSA, CE
Color
Red
Cutout Diameter
22mm
IP Rating
IP66
Material
Plastic

مرجع سريع للتركيب

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

الأبعاد

Front 22mm cutout panel hole diameter Side panel contact ~45mm depth

استكشاف الأعطال وإصلاحها

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

مواصفات سريعة

Actuator Type
Flush
Certifications
UL, CSA, CE
Color
Red
Cutout Diameter
22mm
IP Rating
IP66

ما يقوله المستخدمون

+

“Plastic version of the metal XB4-BA4. Same contact blocks, same 22mm mounting. Use for indoor stop buttons where the budget matters more than aesthetics.”

Reddit r/PLC 20 تصويتات إيجابية عرض الموضوع →