Schneider Electric E11EPB Push Button Kit The Schneider Electric E11EPB is a push button kit features with a start/stop action.
ملاحظات البحث
1. What this is
E11EPB is a Schneider Electric device — series not recognized.
2. Part-number decode
- Series: Schneider (series not recognized)
3. Compatibility & ordering
Schneider's Harmony (22/16mm) and Square D Class 9001 (30mm) are the reference IEC/US command-switch ranges. Match by size (16/22/30mm), bezel material (metal XB4/ZB4 vs plastic XB5/ZB5), function (pushbutton/selector/indicator/E-stop), colour, illumination, and contact arrangement; cross-reference to Allen-Bradley 800F/800T, Siemens 3SU, IDEC HW, or Eaton M22 by the same attributes if needed.
4. Data-quality note
The exact Schneider series/configuration could not be confidently decoded from this part number. Kept and documented; flagged needs-verification.
5. Sources
- Schneider Electric Harmony / Square D Class 9001 catalog (se.com)
- Distributor listing (Rexel / Mouser / Newark) — search the exact part number
المصدر
- Schneider Electric — E11EPB — se.com
المواصفات
|
Enriched by
|
schneider-decoder-2026-08-12
|
|
Manufacturer series
|
Schneider (series not recognized)
|
|
Mouser checked
|
2026-09-28
|
|
Mouser matched
|
false
|
|
Pn status
|
needs-verification
|
|
Product type
|
Push Button Kit
|
|
Series description
|
Schneider Electric control/switch device — exact series/config could not be decoded from this part number; kept and flagged for verification rather than guessed
|
|
Shopify id
|
8346474905913
|
|
Vendor
|
Schneider Electric
|
مرجع سريع للتركيب
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
الأبعاد
استكشاف الأعطال وإصلاحها
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
مواصفات سريعة
- Enriched by
- schneider-decoder-2026-08-12
- Manufacturer series
- Schneider (series not recognized)
- Mouser checked
- 2026-09-28
- Mouser matched
- false
- Pn status
- needs-verification