Sold in packs of 36 switches Smooth tactile switches. Top housing is polycarbonate. Bottom housing is nylon. Stem is POM. These switches are PCB mount (5-pin). Lightly lubed with a thin oil. The stem has two silicone bands that act as a dampener for both the up and down stroke, making them significantly quieter than the standard T1 switch. Polycarbonate top housing Nylon bottom housing POM stem 67g gold-plated spring 5-pin PCB mount Light factory lube
ملاحظات البحث
1. What this is
Prime Keyboards Silent T1 Tactiles (aka Shrimp) is a mechanical keyboard switch from Prime Keyboards. It is tactile, silent.
2. Spec decode (from product name)
- Switch type: tactile
- Silent: yes (dampened)
3. Compatibility & use
Standard MX-style keyboard switch. Choose by feel (linear/tactile/clicky), actuation force, and sound (silent vs standard); 5-pin PCB-mount switches also fit plate-mount boards. Hot-swap or solder depending on your board.
4. Data-quality note
The switch type is decoded from the name; the exact actuation force and mount should be confirmed against the manufacturer's spec. Flagged decoded-partial. (Note: some of these rows are catalogued under a generic push-button/arcade-button category in the source data; the correct device class is keyboard switch, recorded in the specs above.)
5. Sources
- Prime Keyboards product page / keyboard-switch community databases
- Distributor / vendor listing — search the exact switch name
المصدر
- Prime Keyboards Silent T1 Tactiles (aka Shrimp) — keyboard-switch spec
المواصفات
|
Device class
|
mechanical keyboard switch
|
|
Enriched by
|
keyboard-decoder-2026-08-12
|
|
Pn status
|
decoded-partial
|
|
Product type
|
Parts
|
|
Series description
|
Prime Keyboards mechanical keyboard switch (tactile, silent)
|
|
Shopify id
|
7140183736483
|
|
Silent
|
true
|
|
Switch type
|
tactile
|
|
Vendor
|
Prime Keyboards
|
مرجع سريع للتركيب
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
الأبعاد
استكشاف الأعطال وإصلاحها
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
مواصفات سريعة
- Device class
- mechanical keyboard switch
- Enriched by
- keyboard-decoder-2026-08-12
- Pn status
- decoded-partial
- Product type
- Parts
- Series description
- Prime Keyboards mechanical keyboard switch (tactile, silent)
