62g Actuation Force Compatible with Cherry-MX Keycaps PCB Mounted Available in packs of 70, 90, and 110 The MOD switch was built with the keyboard community in mind. The switch was designed by the Korean community. A linear switch with smooth POM stems and lubrication on the side which joins together to make a very soothing and silky feel. The heavy weight bottoms out at approximately ~80g. For the typists with a stronger hand, the feel is almost similar to the MOD-M Linears
ملاحظات البحث
1. What this is
MOD-H 62G LINEAR ("MOD-H 62g Linear Switch") is catalogued as a push-button / switch device from MOD.
2. What we know
- Manufacturer: not recorded (placeholder: "MOD")
- Category: push-button / switch device
- Part number / name: MOD-H 62G LINEAR — MOD-H 62g Linear Switch
- The manufacturer field is a source-catalog placeholder; identify this part from its name and number.
3. How to identify / order the exact part
The full specifications for this part are not machine-decodable from the data we hold. To confirm the exact configuration (contacts, rating, colour, mounting, protocol), search the part number/name on the manufacturer site or a distributor (DigiKey / Mouser / RS).
4. Data-quality note
This page is generated from the catalogued manufacturer, category, and product name. Per our keep-and-document policy we publish a page for every part we hold and state plainly what is known versus what needs verification, rather than deleting the row or inventing specs. Flagged decoded-partial.
5. Sources
- Distributor / marketplace listing — search "MOD-H 62G LINEAR" / "MOD-H 62g Linear Switch"
المصدر
- MOD MOD-H 62G LINEAR — distributor/catalog
المواصفات
|
Device class
|
push-button
|
|
Enriched by
|
generic-fallback-2026-08-12
|
|
Pn status
|
decoded-partial
|
|
Product type
|
Keyboard Switches
|
|
Shopify id
|
9034090905900
|
|
Vendor
|
MOD
|
مرجع سريع للتركيب
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
الأبعاد
استكشاف الأعطال وإصلاحها
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
مواصفات سريعة
- Device class
- push-button
- Enriched by
- generic-fallback-2026-08-12
- Pn status
- decoded-partial
- Product type
- Keyboard Switches
- Shopify id
- 9034090905900