2 versions to choose from: 40g and 52g 40g has 32g actuation force and 40g bottom out force 52g has 40g actuation force and 52g bottom out force 1.8mm pretravel 3.7mm total travel U4 stem PA12 top and bottom housing 40g has 22mm spring 52g has 20mm spring Designed by Moyu Studio Athena, daughter of wisdom and warfare, embodies clarity, precision, and grace. The Keygeek x Moyu Athena switch channels that same balance: a visually stunning linear with a pure and clean sound profile, and incredible smoothness. The switch is using the legendary U4 stem material pioneered by Keygeek, guaranteeing a next generation typing feel.
ملاحظات البحث
1. What this is
Keygeek x Moyu Athena Linear PCB Mount Switch is a mechanical keyboard switch from Keygeek. It is linear, 5-pin (PCB mount).
2. Spec decode (from product name)
- Switch type: linear
- Mount: 5-pin (PCB mount)
3. Compatibility & use
Standard MX-style keyboard switch. Choose by feel (linear/tactile/clicky), actuation force, and sound (silent vs standard); 5-pin PCB-mount switches also fit plate-mount boards. Hot-swap or solder depending on your board.
4. Data-quality note
The switch type, force, and/or mount are decoded from the product name (the standard way keyboard switches are specified). Confirm exact spring curve, travel, and housing/stem material against the manufacturer's spec if precision matters. (Note: some of these rows are catalogued under a generic push-button/arcade-button category in the source data; the correct device class is keyboard switch, recorded in the specs above.)
5. Sources
- Keygeek product page / keyboard-switch community databases
- Distributor / vendor listing — search the exact switch name
المصدر
- Keygeek Keygeek x Moyu Athena Linear PCB Mount Switch — keyboard-switch spec
المواصفات
|
Device class
|
mechanical keyboard switch
|
|
Enriched by
|
keyboard-decoder-2026-08-12
|
|
Mount
|
5-pin (PCB mount)
|
|
Pn status
|
decoded
|
|
Product type
|
Keyboard Switches
|
|
Series description
|
Keygeek mechanical keyboard switch (linear)
|
|
Shopify id
|
9981167960364
|
|
Switch type
|
linear
|
|
Vendor
|
Keygeek
|
مرجع سريع للتركيب
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
الأبعاد
استكشاف الأعطال وإصلاحها
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
مواصفات سريعة
- Device class
- mechanical keyboard switch
- Enriched by
- keyboard-decoder-2026-08-12
- Mount
- 5-pin (PCB mount)
- Pn status
- decoded
- Product type
- Keyboard Switches
