1490MG6

نشط

Hammond Manufacturing 1490MG6

Hammond Manufacturing 1490MG6 — Hammond Manufacturing 1490MG6

صورة السلسلة: يستخدمها البائع لـ 13 أجزاء أخرى أيضًا، لذا قد لا تعرض هذا الإصدار الدقيق.

Push-button Enclosures N12 PB Consolet - 6 PB x 22.5mm - 7.25 x 8.50 x 6.75" - Steel/Gray

ملاحظات البحث

1. What this is

1490MG6 ("Hammond Manufacturing 1490MG6") is catalogued as a push-button / switch device from Hammond Manufacturing.

2. What we know

  • Manufacturer: Hammond Manufacturing
  • Category: push-button / switch device
  • Part number / name: 1490MG6 — Hammond Manufacturing 1490MG6
  • Hammond Manufacturing — electronics ENCLOSURES, racks, and transformers (a Hammond part is usually an enclosure/box, not a switch)

3. How to identify / order the exact part

The full specifications for this part are not machine-decodable from the data we hold. To confirm the exact configuration (contacts, rating, colour, mounting, protocol), search the Hammond Manufacturing catalog for this part number on the manufacturer site or a distributor (DigiKey / Mouser / RS).

4. Data-quality note

This page is generated from the catalogued manufacturer, category, and product name. Per our keep-and-document policy we publish a page for every part we hold and state plainly what is known versus what needs verification, rather than deleting the row or inventing specs. Flagged needs-verification.

5. Sources

  • Hammond Manufacturing product catalog — search "1490MG6" / "Hammond Manufacturing 1490MG6"

Verified distributor data (Mouser)

This part is carried by Mouser Electronics; the description and datasheet above come straight from the distributor's catalog, confirming and expanding the part-number decode above.


المصدر
  1. Hammond Manufacturing 1490MG6 — distributor/catalog

المواصفات

Datasheet url
https://www.mouser.com/datasheet/3/222/1/1490.pdf
Device class
push-button
Enriched by
generic-fallback-2026-08-12
Lead time
27 Days
Mouser checked
2026-09-28
Mouser description
Push-button Enclosures N12 PB Consolet - 6 PB x 22.5mm - 7.25 x 8.50 x 6.75" - Steel/Gray
Mouser matched
true
Mouser part number
546-1490MG6
Pn status
verified
Rohs status
RoHS Compliant

مرجع سريع للتركيب

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

الأبعاد

استكشاف الأعطال وإصلاحها

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

الصور والرسومات

الصور: mouser.com

مواصفات سريعة

Datasheet url
https://www.mouser.com/datasheet/3/222/1/1490.pdf
Device class
push-button
Enriched by
generic-fallback-2026-08-12
Lead time
27 Days
Mouser checked
2026-09-28