Cherry MX Hyperglide Switches are known as the classic keyboard switch. Featuring two extra prongs and a jumper for a more stable mount on a PCB board. Utilizing the latest Hyperglide tooling, these linear switches are smooth and will provide the iconic Cherry MX Black sound signature. The new tooling features tighter tolerances, increased smoothness and doubles the number of actuation to 100 million. Product Features: 18 included in each pack Cherry Black Hyperglide Linear Travel: 4.0mm Actuation: 60g Bottom Out: 80g PCB Mount, 5-Pin Price: $0.35 per switch Cherry Brown Hyperglide Tactile Travel: 4.0mm Actuation: 45g Bottom Out: 60g PCB Mount, 5-Pin Price: $0.35 per switch Includes: 18 Cherry MX Hyperglide Switch
ملاحظات البحث
1. What this is
Cherry MX1A Hyperglide PCB Mount Switches is a mechanical keyboard switch from Cherry. It is 5-pin (PCB mount).
2. Spec decode (from product name)
- Mount: 5-pin (PCB mount)
3. Compatibility & use
Standard MX-style keyboard switch. Choose by feel (linear/tactile/clicky), actuation force, and sound (silent vs standard); 5-pin PCB-mount switches also fit plate-mount boards. Hot-swap or solder depending on your board.
4. Data-quality note
This is identified as a Cherry keyboard switch, but the type/force were not stated in the name — confirm the full spec against the manufacturer. Flagged needs-verification. (Note: some of these rows are catalogued under a generic push-button/arcade-button category in the source data; the correct device class is keyboard switch, recorded in the specs above.)
5. Sources
- Cherry product page / keyboard-switch community databases
- Distributor / vendor listing — search the exact switch name
المصدر
- Cherry Cherry MX1A Hyperglide PCB Mount Switches — keyboard-switch spec
المواصفات
|
Device class
|
mechanical keyboard switch
|
|
Enriched by
|
keyboard-decoder-2026-08-12
|
|
Mount
|
5-pin (PCB mount)
|
|
Pn status
|
needs-verification
|
|
Product type
|
Switches
|
|
Series description
|
Cherry mechanical keyboard switch
|
|
Shopify id
|
4554051354689
|
|
Vendor
|
Cherry
|
مرجع سريع للتركيب
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
الأبعاد
استكشاف الأعطال وإصلاحها
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
مواصفات سريعة
- Device class
- mechanical keyboard switch
- Enriched by
- keyboard-decoder-2026-08-12
- Mount
- 5-pin (PCB mount)
- Pn status
- needs-verification
- Product type
- Switches
اعرف المزيد
المزيد من Cherry
Cherry
80RETROS X HMX 1989 CLASSIC 45G LINEAR PCB MOUNT SWITCHES 35
80Retros x HMX 1989 Classic 45g Linear PCB Mount Switches 35 Pack
Cherry
80RETROS X HMX FJ400 50G LINEAR PCB MOUNT SWITCHES 35 PACK
80Retros x HMX FJ400 50g Linear PCB Mount Switches 35 Pack
Cherry
80RETROS X HMX JOKER 45G LINEAR PCB MOUNT SWITCHES 35 PACK
80Retros x HMX Joker 45g Linear PCB Mount Switches 35 Pack