K80APPBGRCQ

نشط

Banner Engineering K80APPBGRCQ

Banner Engineering K80APPBGRCQ — Banner Engineering K80APPBGRCQ

Pushbutton Switches K80 C-Series EZ-LIGHT: 2-Color Push Button Sensor; Voltage: 12-30 V dc; Housing: Polycarbonate; IP67; Input: PNP (NO); Colors: Green Red; M12 Integral QD

ملاحظات البحث

1. What this is

K80APPBGRCQ is a Banner Engineering indicator light / touch button.

2. Part-number decode

  • Series: Banner Engineering K50/K80/OS
  • Type: indicator light
  • Illuminated: yes

3. Compatibility & ordering

Banner Engineering makes illuminated E-stop buttons (SSA), indicator/pick-to-light devices (K50/K80), tower lights, and wireless nodes. Match by type, actuation, illumination, sealing, and mounting, then use the manufacturer datasheet to confirm the exact contact and termination encoded in the part number.

4. Data-quality note

The Banner Engineering series and switch type are decoded from the part number (grounded in the manufacturer catalog and distributor listings). The exact contact arrangement, termination, and cap/colour are encoded in the full order code — confirm against the datasheet for a precise order (not guessed here).

5. Sources

  • Banner Engineering product catalog (bannerengineering.com)
  • Distributor listing (DigiKey / Mouser) — search the exact part number

المصدر
  1. Banner Engineering — K80APPBGRCQ — bannerengineering.com

المواصفات

Device class
indicator light
Enriched by
banner-decoder-2026-08-12
Illuminated
true
Lead time
0 Days
Manufacturer series
K50/K80/OS
Mouser part number
778-K80APPBGRCQ
Pn status
decoded
Rohs status
Series description
Banner K50/K80/OS-series indicator light / touch button (illuminated indicator or pick-to-light device)

مرجع سريع للتركيب

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

الأبعاد

استكشاف الأعطال وإصلاحها

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

الصور والرسومات

الصور: mouser.com

مواصفات سريعة

Device class
indicator light
Enriched by
banner-decoder-2026-08-12
Illuminated
true
Lead time
0 Days
Manufacturer series
K50/K80/OS