CREAMY PURPLE PRO 30G TACTILE PCB MOUNT SWITCHES 45 PACK
نشطAkko Creamy Purple Pro 30g Tactile PCB Mount Switches 45 Pack
30g actuation force 50g bottom-out force 2.00mm pretravel 3.00mm total travel Nylon bottom housing Nylon stem Polycarbonate top housing 21.5mm steel spring Factory lubed Pack of 45
ملاحظات البحث
1. What this is
Akko Creamy Purple Pro 30g Tactile PCB Mount Switches 45 Pack is a mechanical keyboard switch from Akko. It is tactile, 30g, 5-pin (PCB mount).
2. Spec decode (from product name)
- Switch type: tactile
- Actuation force: 30g
- Mount: 5-pin (PCB mount)
3. Compatibility & use
Standard MX-style keyboard switch. Choose by feel (linear/tactile/clicky), actuation force, and sound (silent vs standard); 5-pin PCB-mount switches also fit plate-mount boards. Hot-swap or solder depending on your board.
4. Data-quality note
The switch type, force, and/or mount are decoded from the product name (the standard way keyboard switches are specified). Confirm exact spring curve, travel, and housing/stem material against the manufacturer's spec if precision matters. (Note: some of these rows are catalogued under a generic push-button/arcade-button category in the source data; the correct device class is keyboard switch, recorded in the specs above.)
5. Sources
- Akko product page / keyboard-switch community databases
- Distributor / vendor listing — search the exact switch name
المصدر
- Akko Akko Creamy Purple Pro 30g Tactile PCB Mount Switches 45 Pack — keyboard-switch spec
المواصفات
|
Actuation Force
The force needed to press the button. Lower = more sensitive. Sanwa ~65g (light), Seimitsu ~85g (medium), Happ ~130g (heavy).
|
30g
|
|
Device class
|
mechanical keyboard switch
|
|
Enriched by
|
keyboard-decoder-2026-08-12
|
|
Mount
|
5-pin (PCB mount)
|
|
Pn status
|
decoded
|
|
Product type
|
Keyboard Switches
|
|
Series description
|
Akko mechanical keyboard switch (tactile)
|
|
Shopify id
|
9544853455148
|
|
Switch type
|
tactile
|
|
Vendor
|
Akko
|
مرجع سريع للتركيب
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
الأبعاد
استكشاف الأعطال وإصلاحها
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
مواصفات سريعة
- Actuation Force
- 30g
- Device class
- mechanical keyboard switch
- Enriched by
- keyboard-decoder-2026-08-12
- Mount
- 5-pin (PCB mount)
- Pn status
- decoded
اعرف المزيد
المزيد من Akko
Akko
BOTANY 38G LINEAR PCB MOUNT SWITCHES 45 PACK
Akko Botany 38g Linear PCB Mount Switches 45 pack
Akko
CREAMY BLACK PRO 55G LINEAR PCB MOUNT SWITCHES 45 PACK
Akko Creamy Black Pro 55g Linear PCB Mount Switches 45 Pack
Akko
CREAMY BLUE PRO V3 45G TACTILE PCB MOUNT SWITCHES 45 PACK
Akko Creamy Blue Pro V3 45g Tactile PCB Mount Switches 45 Pack