XB2BN4161

Active

Schneider Electric XB2BN4161 Push Button

Part number: B

Schneider Electric XB2BN4161 Push Button The Schneider Electric XB2BN4161 is a push button with a current rating of 10 Amps and a voltage rating of 600VAC. It has a screw clamp terminal connection. The XB2BN4161 has a mushroom head actuator type.

Research Notes

1. What this is

XB2BN4161 is a Schneider Electric Harmony XB2 (older generation) complete 22mm pushbutton.

2. Part-number decode

  • Series: Harmony XB2
  • Panel cutout: 22mm
  • Bezel material: Metal
  • Type: complete unit

3. Compatibility & ordering

Schneider's Harmony (22/16mm) and Square D Class 9001 (30mm) are the reference IEC/US command-switch ranges. This is a complete, pre-assembled device (operator + contact block). Match by size (16/22/30mm), bezel material (metal XB4/ZB4 vs plastic XB5/ZB5), function (pushbutton/selector/indicator/E-stop), colour, illumination, and contact arrangement; cross-reference to Allen-Bradley 800F/800T, Siemens 3SU, IDEC HW, or Eaton M22 by the same attributes if needed.

4. Data-quality note

The Schneider series/family is identified; bezel/size are indicative and the exact colour/contact configuration is left to the Schneider datasheet rather than guessed. Flagged decoded-partial.

5. Sources

  • Schneider Electric Harmony / Square D Class 9001 catalog (se.com)
  • Distributor listing (Rexel / Mouser / Newark) — search the exact part number

1 source
  1. Schneider Electric — XB2BN4161 — se.com

Specifications

Bezel material
metal
Component type
complete unit
Enriched by
schneider-decoder-2026-08-12
Manufacturer series
Harmony XB2
Panel cutout
22mm
Pn status
decoded-partial
Product type
Push Button
Wireless Range
Harmony / Square D Class 9001
Series description
Schneider Harmony XB2 (older generation) complete 22mm pushbutton
Shopify id
8346368442681
Vendor
Schneider Electric

Installation Quick Reference

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Dimensions

Troubleshooting

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Where to Buy

Price range

$112.99 — $112.99

from 1 seller in US dollars

Quick Specs

Bezel material
metal
Component type
complete unit
Enriched by
schneider-decoder-2026-08-12
Manufacturer series
Harmony XB2
Panel cutout
22mm