RZ-GREEN-V3
ActiveRazer Green Switch V3 Clicky
Razer Green V3 — proprietary clicky mechanical switch.
Common Applications
Razers clicky switch for their Huntsman and BlackWidow keyboards. 50g actuation, audible click. MX-compatible stem but the switch is only available inside Razer keyboards — not sold separately. The housing is optimized for sound dampening.
Research Notes
1. Overview
The Razer Green Switch (V3, 3rd-gen) is Razer's signature clicky + tactile mechanical keyswitch — the "Green" was Razer's first in-house gaming switch and is the clicky option (the tactile-quiet counterpart is Razer Orange, the linear is Razer Yellow). It has 50 gf actuation, 1.9 mm actuation / 4.0 mm total travel, a distinct tactile bump with an audible click, and is rated to ~100 million keystrokes. It uses an MX-style stem (Razer switches are manufactured by Kaihua/Greetech to Razer's spec) and appears in keyboards like the BlackWidow V4.
2. User Sentiment
Popular with gamers who want a crisp, loud, tactile-and-clicky feel with a slightly shorter actuation than a standard MX Blue. Praised for satisfying click and reliability; the common criticisms are the noise (not office-friendly) and that, being a proprietary Razer switch, it's most at home in Razer boards (though the stem is MX-keycap compatible). Newer generations (V2/V3) refined the sound/consistency.
3. Real-World Applications
Gaming and typing on Razer mechanical keyboards where clicky tactile feedback is wanted. MX-compatible keycaps fit; some Razer boards offer hot-swap sockets for the Razer switches.
4. Technical Specifications
- Type: Clicky and tactile mechanical switch
- Actuation force: ~50 gf
- Travel: 1.9 mm actuation, 4.0 mm total
- Life: ~100 million keystrokes
- Stem/keycaps: MX-style stem (MX keycap compatible)
- Color: green housing
- Generation: V3 (3rd-gen Razer Green)
5. Ordering & Compatibility
Primarily supplied inside Razer keyboards; also sold as Razer mechanical switch packs for hot-swappable Razer boards. Takes standard MX keycaps. The Razer switch family: Green (clicky/tactile), Orange (tactile, quiet), Yellow (linear, silent-ish).
6. Known Issues
No notable reliability issues — a mainstream, well-rated switch. Practical notes: it's loud (clicky), it's a Razer-ecosystem switch (best experience in Razer boards, though keycap-compatible with MX), and buyers should pick Orange/Yellow instead if they want quiet/linear feel.
2 sources
- Razer Mechanical Switches — Green Clicky — razer.com
- Razer BlackWidow V4 X — Razer Green (Tactile & Clicky, 50g) — rtings.com
Openness & Hackability
Proprietary switch, not sold separately. Only available inside Razer keyboards. Cannot be harvested for custom builds without desoldering.
Specifications
|
Actuation Force
The force needed to press the button. Lower = more sensitive. Sanwa ~65g (light), Seimitsu ~85g (medium), Happ ~130g (heavy).
|
50g
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
Green housing
|
|
Keycap compat
|
MX-compatible
|
|
Mechanical Life
How many press cycles before mechanical failure. Higher is better — 10M cycles at 100 presses/day = 274 years.
|
100,000,000 cycles
|
|
Switch type
|
Clicky + tactile (MX-style stem)
|
|
Travel Distance
How far the button moves when pressed. Shorter = faster response. Sanwa 0.85mm is extremely short for competitive gaming.
|
1.9mm actuation, 4.0mm total
|
Installation Quick Reference
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Dimensions
Troubleshooting
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Where to Buy
Price range
$57.77 — $133.92
across 2 sellers in US dollars
Quick Specs
- Actuation Force
- 50g
- Color
- Green housing
- Keycap compat
- MX-compatible
- Mechanical Life
- 100,000,000 cycles
- Switch type
- Clicky + tactile (MX-style stem)
What People Are Saying
“Proprietary switch, not sold separately. Only available inside Razer keyboards. Cannot be harvested for custom builds without desoldering.”