ASSA ABLOY · PB3 Series

PB3-ERE

Active
UL CE

Request-to-Exit Sensor (Touchless)

ASSA ABLOY PB3 Series Introduced circa 2020

ASSA ABLOY touchless request-to-exit sensor — wave to exit.

Common Applications

Post-COVID touchless exit sensor. Wave your hand near the infrared sensor — no physical contact needed. Replaced physical push-to-exit buttons in hospitals, clean rooms, and food processing facilities. The pandemic accelerated adoption of touchless alternatives to push buttons.

Research Notes

1. What this is

ASSA ABLOY PB3-ERE is a touchless request-to-exit (REX) sensor used in access-control door systems — wave-to-exit, no physical contact. It signals the door controller to release the lock. An access-control device rather than a general pushbutton; confirm wiring (NO/NC/relay) and voltage on the ASSA ABLOY datasheet.

2. Data-quality note

This row was catalogued in the curated range and left un-enriched by the original research loop; under the keep-and-document policy it now has an honest page. Flagged decoded-partial.

3. Sources

  • Manufacturer catalog / distributor listing — search the exact part number

Specifications

Certifications
UL, CE
Contact Configuration
SPDT (dry contact)
Enriched by
curated-closeout-2026-08-12
Mounting Type
Single-gang box
Pn status
decoded-partial
Protocol
Infrared proximity
Wireless Range
2-6 inches adjustable

Installation Quick Reference

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Dimensions

Wiring Diagram

Troubleshooting

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Where to Buy

Price range

$44.48 — $118.83

across 2 sellers in US dollars

Quick Specs

Certifications
UL, CE
Contact Configuration
SPDT (dry contact)
Enriched by
curated-closeout-2026-08-12
Mounting Type
Single-gang box
Pn status
decoded-partial

What People Are Saying

•

“Post-COVID touchless exit sensor. Wave your hand near the infrared sensor — no physical contact needed. Replaced physical push-to-exit buttons in hospitals, clean rooms, and food processing facilities”

Reddit r/security 13 upvotes View thread →